JMS Configurations

JMS Components

MC2 provides an out-of-box configuration. All predefined components are stored in a single file. However, you can extend the number of JMS components by creation of new component-*.json file similar to the one described below.

The configuration files of JMS components (components.json) are stored in this path:

estar/tpe/dynamic/mc2/eaglejms/components/*.json

Do NOT use underscore character ("_") in JMS component and JMS connection names in JSON.

On this page

1 JMS Components
- 1.1 components.json
2 JMS Connection Configuration
- 2.1 Path to connections
  - 2.1.1 connections.json
  - 2.1.2 connections.json
  - 2.1.3 connections.json
3 External Vendor Libraries

The following is a common configuration format of components.json:

components.json

 {
    "Components": [
        //* ActiveMQ:
        {
            "componentName": "eagle-amq",
            "componentClass": "org.apache.activemq.camel.component.ActiveMQComponent",
            "connectionFactory": "#{wrapper:amqconnPool_native[amqConnFactory]}" //"#{cf:amqConnFactory}" 
        },
        {
            "componentName": "eagle-amq-tds",
            "componentClass": "org.apache.activemq.camel.component.ActiveMQComponent",
            "connectionFactory": "#{wrapper:single_amqconnPool_native[amqConnFactoryTds]}" //"#{cf:amqConnFactory}" 
        },
        {
            "componentName": "eagle-amq-no-pool",
            "componentClass": "org.apache.activemq.camel.component.ActiveMQComponent",
            "connectionFactory": "#{wrapper:single_amqconnPool_native[amqConnFactory]}"
        },
        //* IBM WebSphere MQ (IBM MQ):
        {
            "componentName": "wmq",
            "componentClass": "org.apache.camel.component.jms.JmsComponent",
            "connectionFactory": "#{wrapper:connPool[wmqConnFactory]}"//"#{cf:wmqConnFactory}"
        },
        {
            "componentName": "wmq-tds",
            "componentClass": "org.apache.camel.component.jms.JmsComponent",
            "connectionFactory": "#{wrapper:single_connPool[wmqConnFactory]}"//"#{cf:wmqConnFactory}"
        },
        {
            "componentName": "wmq-no-pool",
            "componentClass": "org.apache.camel.component.jms.JmsComponent",
            "connectionFactory": "#{cf:wmqConnFactory}"
        }

        //============================ Components with SSL ==================================
        ,
        {
            "componentName": "wmqssl",
            "componentClass": "org.apache.camel.component.jms.JmsComponent",
            "connectionFactory": "#{wrapper:connPool[wmqConnFactorySSL]}"
        },
        {
            "componentName": "wmqssl-no-pool",
            "componentClass": "org.apache.camel.component.jms.JmsComponent",
            "connectionFactory": "#{cf:wmqConnFactorySSL}"
        },
        {
            "componentName": "eagle-amqssl",
            "componentClass": "org.apache.activemq.camel.component.ActiveMQComponent",
            "connectionFactory": "#{wrapper:amqconnPool_native[amqConnFactorySSL]}" 
        },
        {
            "componentName": "eagle-amqssl-no-pool",
            "componentClass": "org.apache.activemq.camel.component.ActiveMQComponent",
            "connectionFactory": "#{cf:amqConnFactorySSL}" 
        }
    ]
    ,
    "ConnectionFactories": { //*** reference: cf
            "wmqConnFactory": { "class": "com.ibm.mq.jms.MQConnectionFactory" }
            ,
            "amqConnFactory": { "class": "org.apache.activemq.ActiveMQConnectionFactory",
                                "parameters": { "UserName": "#{stream:USERID}",
                                                "Password": "#{stream:USERPASSWORD}"}
            }
            ,
            "amqConnFactoryTds": { "class": "org.apache.activemq.ActiveMQConnectionFactory", //* AMQ connection factory for topic durable subscription
                                   "parameters": { "UserName": "#{stream:USERID}",
                                                   "Password": "#{stream:USERPASSWORD}",
                                                   "ClientID": "#{stream:CLIENT_ID}" }
            }
            ,
            "wmqConnFactorySSL": { "class": "com.ibm.mq.jms.MQConnectionFactory", 
                                   "parameters": { "SSLFipsRequired" : false ,
                                                   "SSLSocketFactory": "#{instance:SSLSocketFactory}" ,
                                                   "SSLCipherSuite"  : "TLS_RSA_WITH_AES_128_CBC_SHA256" } 
            }
            ,
            "amqConnFactorySSL": { "class": "org.apache.activemq.ActiveMQSslConnectionFactory", 
                                   "parameters": { "KeyAndTrustManagers": "#{instance:KeyAndTrustManagers}",
                                                   "UserName": "#{stream:USERID}",
                                                   "Password": "#{stream:USERPASSWORD}" }
            }
    }
    ,
    "Wrappers": {
            "connPool<T>": { "class": "org.springframework.jms.connection.CachingConnectionFactory",   // #{wrapper:connPool[wmqConnFactory]}
                             "parameters": { "setTargetConnectionFactory": "#{cf:<T>}",
                                             "setSessionCacheSize": "100"
                                           },
                             "init_method": "initConnection",
                             "destroy_method": "by default"
            }
            ,
            "single_connPool<T>": { "class": "org.springframework.jms.connection.SingleConnectionFactory",   // #{wrapper:connPool[wmqConnFactory]}
                                    "parameters": { "setTargetConnectionFactory": "#{cf:<T>}",
                                                    "ClientId": "#{stream:CLIENT_ID}"
                                                  },
                                    "init_method": "initConnection",
                                    "destroy_method": "destroy"
            }
            ,
            "amqconnPool": { "class": "org.springframework.jms.connection.CachingConnectionFactory",
                             "parameters": { "TargetConnectionFactory": "#{cf:amqConnFactory}",
                                             "SessionCacheSize": "10"
                                            },
                             "init_method": "initConnection",
                             "destroy_method": "by default"
            }
            ,
            "amqconnPool_native<T>": { "class": "org.apache.activemq.pool.PooledConnectionFactory",
                                       "parameters": { "ConnectionFactory": "#{cf:<T>}"
                                                     },
                                       "init_method": "start",
                                       "destroy_method": "stop"
            }
            ,
            "single_amqconnPool_native<T>": { "class": "org.apache.activemq.pool.PooledConnectionFactory",
                                              "parameters": { "ConnectionFactory": "#{cf:<T>}",
                                                              "MaxConnections": "1",
                                                              "MaximumActiveSessionPerConnection": "1"
                                                            },
                                              "init_method": "start",
                                              "destroy_method": "stop"
            }
    }
}

JMS Connection Configuration

The configuration files of JMS connections are stored by this path:

Path to connections

estar/tpe/dynamic/mc2/eaglejms/connections/*.json

This is an example of the format of JMS configuration of connections:

connections.json

{ 
    "Region": "Specific Oracle SID of the region", /*Specific Oracle SID of region name to which this config belongs*/
    "Connections": [
        { 
            "ConnectionName": "mywmq.connection", /* do NOT use underscore character ("_") in name*/
            "ComponentName": "wmq", /* reference to component name defined in components.json */
            "Parameters": { // Some specific parameters
    			"port": 1415,
    			"ctransportType": 1 ,
    			"clientID": "client ID" /* sets Client ID */
            },
            /* JNDI has a higher priority: if not null then this object will be used as a JMS
               connection factory */
            //"JndiConnectionFactory": "my.jndi.connection.factory1"
        }
     ]
}

JndiConnectionFactory - property is not supported yet.

You may need to make a JMS Connection configuration for more than one JMS Component. For example, when you interact with more than one JMS broker. In this case, you would add one more section in connection.json config, as shown in the example below:

connections.json

{ 
    "Region": "Specific Oracle SID of the region", /*Specific Oracle SID of region name to which this config belongs*/
    "Connections": [
        { // First connection
            "ConnectionName": "my.FIRST.amq.connection", /* do NOT use underscore character ("_") in name*/
            "ComponentName": "amq", /* reference to component name defined in components.json */
            /* JNDI has a higher priority: if not null then this object will be used as a JMS connection factory */
            //"JndiConnectionFactory": "my.jndi.connection.factory",
            "Parameters": {
                "brokerURL": "tcp://*****.eagleinvsys.com:61616" /* connection url (AMQ): Host name or IP + port */
            }
        },
        
        { // Second connection config
            "ConnectionName": "my.jndi.wmq.connection", /* do NOT use underscore character ("_") in name*/
            "ComponentName": "wmq", /* reference to component name defined in components.json */
            "Parameters": { // Some specific parameters
    			"transportType": 1,
				"port": 1414,
				"channel": "",
				"queueManager": "",
				"HostName": ""
            }
            /* JNDI has a higher priority: if not null then this object will be used as a JMS connection factory */
            //"JndiConnectionFactory": "my.jndi.connection.factory"
        }
     ]
}

ConnectionName - all connection names must be unique

ComponentName - Component names are defined in the components.json configuration file.
All other parameters must be specific for your purpose.

Consider the following example of adding a User Name and Password, if you have to connect to JMS broker with your credentials:

connections.json

{ 
    "Region": "Specific Oracle SID of the region", /*Specific Oracle SID of region name to which this config belongs*/
    "Connections": [
        {
            "ConnectionName": "myactivemq.connection",
            "ComponentName": "eagle-amq",
            "Parameters": {
                "brokerURL": "tcp://xxxxxx.eagleinvsys.com:61616", /* connection url: Host name or IP + port */
                "UserName": "#{stream:USERID}",      /* just copy it as is - it will be JMS Connection User value from Stream parameters*/
                "Password": "#{stream:USERPASSWORD}" /* just copy it as is - it will be JMS Connection Password value from Stream parameters*/
            },
            /* JNDI has a higher priority: if not null then this object will be used as a JMS connection factory */
            //"JndiConnectionFactory": "my.jndi.connection.factory1"
        }
    ]
}

External Vendor Libraries

In most cases, to enable JMS Messaging, you need to make all dependencies available to MC2.

All external dependencies must be stored in eagle/estar/tpe/dynamic/mc2/sharedlibs/.