Folder Deployment for Artifactory Inaccessible Regions

Owned by Dmitry Donosiyan (Unlicensed)
Last updated: Jun 10, 2020 by Zekariyas Tefera (Unlicensed)
2 min read

In this page:

Overview

Please note, that JMS clients should 
- disable JMS, disable MC (before installation),
- install EagleML release as described below,
- bring up MC and then bring up JMS.

For regions without access to artifactory, the standard deploy recommendation is by

  1. downloading the corresponding archives from artifactory
  2. dropping the archive to the backend staging folder
  3. deploy from MCC deploy on demand

For folder deployment, is it always necessary to deploy the EagleInstaller from the same monthly release first.
Following are examples of folder deployment from Eagle Access Artifactory to deploy Installer and EagleML or EagleML-without-overlays for September, 2018 release.

Download Installer and Corresponding Components

PGH artifcatory:

Eagle Installer URL:
https://artifactory.osapps.eagleaccess.com/artifactory/rd-release-virtual-pgh/EagleInstaller/[RELEASE]/EagleInstaller-[RELEASE].zip

EagleML release:
https://artifactory.osapps.eagleaccess.com/artifactory/rd-release-virtual-pgh/EagleML/[RELEASE]/EagleML-[RELEASE].zip

EagleML release without overlays:
https://artifactory.osapps.eagleaccess.com/artifactory/rd-release-virtual-pgh/EagleML-without-overlays/[RELEASE]/EagleML-without-overlays-[RELEASE].zip

Please refer to the Release Table to understand the numbers you should enter instead of [RELEASE]

Drop the files to one of the backend staging folders of the region

Deploy Using MCC

To do that, drop both zip files into the following staging folder: data/msgcenter/cmw_staging_folder/

Deploy the Installer from folder first:

After completion, deploy EagleML.zip :

or EagleML-without-overlays.zip:

All older deploys or specific components can follow the process above.

Proceed to Post Install steps

Deploy Using NDFA

This method is available

  • only if a September 2018 EagleML release or newer is installed and you upgrade from it, it will not work for clean install;
  • only for Unix environments, it will not work for Windows

To deploy via NDFA drop both archives into the backend incoming folder of the NDFA stream tpe\data\msgcenter\in\RAW\eagle_ml-2-0_default_cm_ndfa\incoming\

  • drop the Installer archive 
  • drop either EagleML or EagleML-without-overlays archive

Important

Do not drop these archives with MCC - Send Data to stream! MCC does not handle them correctly. Please use backend folder

Proceed to Post Install steps

Deploy Using RTR

Drop both zip files into the following staging folder: data/msgcenter/cmw_staging_folder/

Send the following RTR into the control message stream

 Click to expand the RTR to install Eagle Installer:

<EagleML
eaglemlVersion="2-0"
eaglemlType="RunTaskRequest"
xsi:schemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd"
xsi:type="RunTaskRequest"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0">
<header>
<messageId>B90UBD20ELGLFEKM</messageId>
<sentBy>http://www.eagleinvsys.com/</sentBy>
<sendTo>http://www.eagleinvsys.com/eagle_ml-2-0_default_cm_control_message</sendTo>
<creationTimestamp>2019-03-01T12:22:04</creationTimestamp>
</header>
<taskIdentifier>
<correlationId correlationIdScheme="correlationIdScheme">Deploy_EagleML_folder_RELEASE</correlationId>
<businessTaskId correlationIdScheme="businessTaskIdScheme">Deploy_EagleML_folder_RELEASE</businessTaskId>
</taskIdentifier>
<taskTypeEnum>NEW</taskTypeEnum>
<taskParameters>
<taskParameter>
<name>ActionType</name>
<dataType>S</dataType>
<value>EXECUTE</value>
</taskParameter>
<taskParameter>
<name>WorkflowName</name>
<dataType>S</dataType>
<value>eagle_wrf_deploy</value>
</taskParameter>
<taskParameter>
<name>ExecuteToFirstFailure</name>
<dataType>S</dataType>
<value>1</value>
</taskParameter>
<taskParameter>
<name>ComponentName</name>
<dataType>S</dataType>
<value>EagleInstaller</value>
</taskParameter>
<taskParameter>
<name>DeliveryMethod</name>
<dataType>S</dataType>
<value>folder</value>
</taskParameter>
<taskParameter>
<name>ComponentVersion</name>
<dataType>S</dataType>
<value>RELEASE</value>
</taskParameter>
<taskParameter>
<name>ArtifactoryLocation</name>
<dataType>S</dataType>
<value></value>
</taskParameter>
<taskParameter>
<name>PerformAction</name>
<dataType>S</dataType>
<value>stop_mccommandexecutor</value>
</taskParameter>
<taskParameter>
<name>ReplyDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>ACKDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>FolderPath</name>
<dataType>S</dataType>
<value>data/msgcenter/cmw_staging_folder/EagleInstaller-2018.09.14.1.zip</value>
</taskParameter>
<taskParameter>
<name>ForceInstall</name>
<dataType>S</dataType>
<value>YES</value>
</taskParameter>
<taskParameter>
<name>SkipInstallerInstallation</name>
<dataType>S</dataType>
<value>Y</value>
</taskParameter>
<taskParameter>
<name>Rollback</name>
<dataType>S</dataType>
<value>N</value>
</taskParameter>
</taskParameters>
</EagleML>

Send one the following RTRs to install either EagleML or EagleML-without-overlays

 Click to expand the RTR to install EagleML:

<EagleML
eaglemlVersion="2-0"
eaglemlType="RunTaskRequest"
xsi:schemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd"
xsi:type="RunTaskRequest"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0">
<header>
<messageId>B90UBD20ELGLFEKM</messageId>
<sentBy>http://www.eagleinvsys.com/</sentBy>
<sendTo>http://www.eagleinvsys.com/eagle_ml-2-0_default_cm_control_message</sendTo>
<creationTimestamp>2019-03-01T12:22:04</creationTimestamp>
</header>
<taskIdentifier>
<correlationId correlationIdScheme="correlationIdScheme">Deploy_EagleML_folder_RELEASE</correlationId>
<businessTaskId correlationIdScheme="businessTaskIdScheme">Deploy_EagleML_folder_RELEASE</businessTaskId>
</taskIdentifier>
<taskTypeEnum>NEW</taskTypeEnum>
<taskParameters>
<taskParameter>
<name>ActionType</name>
<dataType>S</dataType>
<value>EXECUTE</value>
</taskParameter>
<taskParameter>
<name>WorkflowName</name>
<dataType>S</dataType>
<value>eagle_wrf_deploy</value>
</taskParameter>
<taskParameter>
<name>ExecuteToFirstFailure</name>
<dataType>S</dataType>
<value>1</value>
</taskParameter>
<taskParameter>
<name>ComponentName</name>
<dataType>S</dataType>
<value>EagleML</value>
</taskParameter>
<taskParameter>
<name>DeliveryMethod</name>
<dataType>S</dataType>
<value>folder</value>
</taskParameter>
<taskParameter>
<name>ComponentVersion</name>
<dataType>S</dataType>
<value>RELEASE</value>
</taskParameter>
<taskParameter>
<name>ArtifactoryLocation</name>
<dataType>S</dataType>
<value></value>
</taskParameter>
<taskParameter>
<name>PerformAction</name>
<dataType>S</dataType>
<value>stop_mccommandexecutor</value>
</taskParameter>
<taskParameter>
<name>ReplyDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>ACKDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>FolderPath</name>
<dataType>S</dataType>
<value>data/msgcenter/cmw_staging_folder/EagleML-2018.09.14.4.zip</value>
</taskParameter>
<taskParameter>
<name>ForceInstall</name>
<dataType>S</dataType>
<value>YES</value>
</taskParameter>
<taskParameter>
<name>SkipInstallerInstallation</name>
<dataType>S</dataType>
<value>Y</value>
</taskParameter>
<taskParameter>
<name>Rollback</name>
<dataType>S</dataType>
<value>N</value>
</taskParameter>
</taskParameters>
</EagleML>

 Click to expand the RTR to install EagleML-without-overlays:

<EagleML
eaglemlVersion="2-0"
eaglemlType="RunTaskRequest"
xsi:schemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd"
xsi:type="RunTaskRequest"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0">
<header>
<messageId>B90UBD20ELGLFEKM</messageId>
<sentBy>http://www.eagleinvsys.com/</sentBy>
<sendTo>http://www.eagleinvsys.com/eagle_ml-2-0_default_cm_control_message</sendTo>
<creationTimestamp>2019-03-01T12:22:04</creationTimestamp>
</header>
<taskIdentifier>
<correlationId correlationIdScheme="correlationIdScheme">Deploy_EagleML_folder_RELEASE</correlationId>
<businessTaskId correlationIdScheme="businessTaskIdScheme">Deploy_EagleML_folder_RELEASE</businessTaskId>
</taskIdentifier>
<taskTypeEnum>NEW</taskTypeEnum>
<taskParameters>
<taskParameter>
<name>ActionType</name>
<dataType>S</dataType>
<value>EXECUTE</value>
</taskParameter>
<taskParameter>
<name>WorkflowName</name>
<dataType>S</dataType>
<value>eagle_wrf_deploy</value>
</taskParameter>
<taskParameter>
<name>ExecuteToFirstFailure</name>
<dataType>S</dataType>
<value>1</value>
</taskParameter>
<taskParameter>
<name>ComponentName</name>
<dataType>S</dataType>
<value>EagleML</value>
</taskParameter>
<taskParameter>
<name>DeliveryMethod</name>
<dataType>S</dataType>
<value>folder</value>
</taskParameter>
<taskParameter>
<name>ComponentVersion</name>
<dataType>S</dataType>
<value>RELEASE</value>
</taskParameter>
<taskParameter>
<name>ArtifactoryLocation</name>
<dataType>S</dataType>
<value></value>
</taskParameter>
<taskParameter>
<name>PerformAction</name>
<dataType>S</dataType>
<value>stop_mccommandexecutor</value>
</taskParameter>
<taskParameter>
<name>ReplyDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>ACKDeliveryMethod</name>
<dataType>S</dataType>
<value>FILE</value>
</taskParameter>
<taskParameter>
<name>FolderPath</name>
<dataType>S</dataType>
<value>data/msgcenter/cmw_staging_folder/EagleML-without-overlays-2018.09.14.4.zip</value>
</taskParameter>
<taskParameter>
<name>ForceInstall</name>
<dataType>S</dataType>
<value>YES</value>
</taskParameter>
<taskParameter>
<name>SkipInstallerInstallation</name>
<dataType>S</dataType>
<value>Y</value>
</taskParameter>
<taskParameter>
<name>Rollback</name>
<dataType>S</dataType>
<value>N</value>
</taskParameter>
</taskParameters>
</EagleML>

Proceed to Post Install steps