Create Outbound JMS Streams
To create an outbound JMS message stream:
- Open Message Center Editor and go to the Message Center Streams box.
- Go to the Streams tab and click on Add stream.
- Configure the parameters for your outbound message stream in the pop-up window:
For example:
Stream name: JMS_EAGLETIP_TEST_SEND
Delivery method: JMSPTP
Stream Direction: Outbound
Delivery Format: XML
Ruleset File: eagle_ml-2-0_cm/out/xml/task_distributor.rsf
Queue Connection Factory Name: ConnectionFactory
Queue Name: dynamicQueues/JMS_eagletip_test
Deliver Data As Is: YES
Data Is Binary: YES
JMS Connection User: mcadmin
JMS Connection Password: ******
Eagle JMS Client ID: QAJMS
Important Note
Queue Name should exist on your JMS server! Set the parameters of delivery in w_config_custom.inc:
<!-- JMS Delivery Values --> <COL TAG="W_JMS_DEF_ACK_STREAM" EXPRESSION="'JMS_EAGLETIP_ack'" USERDESCRIPTION="Default JMS ACK Delivery Stream"/> <COL TAG="W_JMS_DEF_REPLY_STREAM" EXPRESSION="'JMS_EAGLETIP_reply'" USERDESCRIPTION="Default JMS REPLY Delivery Stream"/> <COL TAG="W_JMS_DEF_EXTRACT_STREAM" EXPRESSION="'JMS_EAGLETIP_TEST_SEND'" USERDESCRIPTION="Default JMS EXTRACT Delivery Stream"/>
Use this control message to extract data from DB:
<EagleML xsi:type="RunTaskRequest" eaglemlType="RunTaskRequest" eaglemlVersion="2-0" xsi:SchemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0"> <header> <messageId>PERFDT201602023225323699300034</messageId> <sentBy>http://www.jennison.com</sentBy> <sendTo>http://www.eagleinvsys.com/eagleml-2-0_control_messages</sendTo> <replyTo>http://www.jennison.com</replyTo> <creationTimestamp>2015-02-20T23:22:53.237-05:00</creationTimestamp> </header> <taskIdentifier> <correlationId>SRV20160202EXTR00032</correlationId> <businessTaskId>SRVTESTEXTRACT0033</businessTaskId> </taskIdentifier> <taskTypeEnum>NEW</taskTypeEnum> <taskParameters> <taskParameter> <name>DeliveryMethod</name> <datatype>S</datatype> <value>JMS</value> </taskParameter> <taskParameter> <name>ActionType</name> <dataType>S</dataType> <value>EXTRACT</value> </taskParameter> <taskParameter> <name>StreamName</name> <dataType>S</dataType> <value>eagle_ml-2-0_default_out_q</value> </taskParameter> <taskParameter> <name>FeedType</name> <dataType>S</dataType> <value>SMFEXTRACT</value> </taskParameter> <taskParameter> <name>todate</name> <dataType>S</dataType> <value>2016-02-02 23-59-59</value> </taskParameter> <taskParameter> <name>fromdate</name> <dataType>S</dataType> <value>2016-02-02 00-00-00</value> </taskParameter> <taskParameter> <name>maxrows</name> <dataType>S</dataType> <value>100</value> </taskParameter> </taskParameters> </EagleML>
JMSPTP Parameters for Outbound Message Streams
The following table lists JMSPTP parameters for outbound message streams.
Parameter | Description |
---|---|
Queue Connection Factory Name | The connection factory used to send messages. This parameter is optional. If it is not defined, the value is taken from the jmsmessage.ini file (the configuration file of the Eagle JMS Broker Client) by the JMSConnectionFactoryQueue option. Parameter value: string. |
Queue Name | This is a required parameter that specifies the queue name to which the resulting messages will be posted. For ActiveMQ, prefix the destination with dynamicQueues/. Parameter value: string. |
Reply Destination Name | Defines the queue name into which the remote system will send the replies. |
Local Delivery Folder | Defines the plugin delivery folder. It is used as internal staging area. Eagle recommends using the default value. |
Deliver Data As Is | If set to YES, the file from incoming will be delivered directly to the JMS destination (queue or topic) without any processing by the rules selected in the stream definition |
Data is Binary | If set to YES, the file will be sent directly to the JMS destination as a binary message. If set to NO and Deliver Data As Is is set to YES, the file will be sent as a Text message, and the encoding will be assumed to be UTF-8. |
Maximum Number Of Files | Defines the maximum number of files to be processed in parallel. If it is not specified or is set to 0, the number of files is unlimited. This parameter is optional, its value is a positive number. |
JMS Connection User | User ID for authenticating with the JMS Provider. |
JMS Connection Password | User Password for authenticating with the JMS Provider. |
Eagle JMS Client ID | Client ID specified in the eaglejmsbroker.properties file. |
JNDI Provider URL | Provider URL for JNDI classes. By default, Eagle expects JNDI parameters to be stored in the jndi.properties file on disk. Corresponds to the java.naming.provider.urlsetting. |
JNDI Security Authentication | JNDI Security Authentication parameter. Corresponds to the java.naming.security.authentication setting. Possible values: None, Simple and Strong. |
JNDI Security Protocol | JNDI Security Protocol parameter. Corresponds to the java.naming.security.protocol setting. |
JNDI Security Principal | JNDI Security Principal parameter. Corresponds to the java.naming.security.principal setting. |
JNDI Security Credentials | JNDI Security Credentials parameter. Corresponds to the java.naming.security.credentials setting. |
JNDI Security Realm | JNDI Security Realm parameter. Corresponds to the java.naming.security.sasl.realm setting. |
MC events log | Level of detail logging. Possible values include:
|
Failure Tolerance (%) | Not applicable for JMS-based streams. |