Restart MC2

To restart MC2:

1. If you are a super user, you can use the following command to restart MC2:

   curl --user username:password --header "commandType:restartmc2" --header "commandValue:all" --header "SOAPAction:/EagleMLWebService/RunTaskRequestSync" --data-binary @RTR_RESTARTMC2.xml https://frontendserver/EagleMLWebService30 -o restartMC2.txt

    

2. Use the following required HTTP headers  in the RTR_RESTARTMC2.xml displayed below:
   
   SOAPAction:/EagleMLWebService/RunTaskRequestSync - for the SOAP request
   commandType:restartmc2
   commandValue:[all] or [current]
   
   

   RTR_RESTARTMC2.xml

   <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"> <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <runTaskRequest xmlns="http://www.eagleinvsys.com/2011/wsdl/EagleML-2-0"> <EagleML xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0" eaglemlVersion="2-0" xsi:schemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd" eaglemlType="RunTaskRequest"> <header> <messageId>541C2B1B66833C6C</messageId> <sentBy>http://www.client.com/user</sentBy> <sendTo>http://www.eagleinvsys.com/eagle_ml-2-0_default_cm_wrkfl_listener</sendTo> </header> <taskIdentifier> <correlationId correlationIdScheme="correlationIdScheme">{GUID}</correlationId> <businessTaskId correlationIdScheme="businessTaskIdScheme">541C2B1B66833C6C</businessTaskId> </taskIdentifier> <taskParameters> <taskParameter> <name>FeedType</name> <dataType>S</dataType> <value>RESTART</value> </taskParameter> <taskParameter> <name>ActionType</name> <dataType>S</dataType> <value>EXECUTE</value> </taskParameter> <taskParameter> <name>commandType</name> <dataType>S</dataType> <value>restartmc2</value> </taskParameter> <taskParameter> <name>commandValue</name> <dataType>S</dataType> <value>all</value> </taskParameter> </taskParameters> </EagleML> </runTaskRequest> </s:Body> </s:Envelope>

Restart with a SOAP Request to MC2  - Not Authenticated

The same rules apply for a backend server except for a difference in the request. In the example below, 20421 is the default SOAP port number (system.xml baseport + 201).

Restart with the eagle_ml-2-0_extract_service_control_message Message Center Stream

You can restart using MCC or using the incoming folder.

To restart using MCC:

Send RTR_RESTARTMC2.xml file to stream execution by clicking on Send Data in MCC.

Open

To restart using incoming folder:

Copy the RTR_RESTARTMC2.xml file to the incoming folder by the next path on the backend server.
In the example below, TPE_FOLDER is the path to the tpe folder.
[TPE_FOLDER]/data/msgcenter/in/XML/eagle_ml-2-0_extract_service_control_message/incoming.

Configuration

Only Admin users can restart MC2.

To enable/disable the restart of MC2:

1. To enable/disable the restart of MC2, use the camel route restartmc2 property in eagle/estar/tpe/cfg/eaglemc2s/extractservice/application.yml. By default, the MC2 restart is enabled.

2. You can use the restart MC2 command to execute the restart after a defined delay. The default delay is 90 seconds.

   When restart requests go through a IIS server, only Admin users can restart MC2. However, there is also the denyemptyusername property available that allows non-authenticated users to make requests directly to LB.