Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The sample [data delete IWS solution can be started by sending a Control Message to the eagle_ml-2-0_default_cm_control_message stream. In this Control Message, you can specify various required and default parameters.
NOTE: In the Control Message, elements <messageId>, <correlationId>, and <businessTaskId> must be unique. Resending a file with the same values in these elements will result in an error.
The following is a sample RunTaskRequest (RTR or CM) for the data delete solution. 
<EagleML xmlns="http://www.eagleinvsys.com/2011/EagleML-2-0"  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="RunTaskRequest" eaglemlVersion="2-0"  xsi:schemaLocation="http://www.eagleinvsys.com/2011/EagleML-2-0 eagleml-main-2-0.xsd" eaglemlType="RunTaskRequest">    <header>        <messageId>TST_TSR_ACK_RENAME</messageId>        <sentBy>http://www.eagleinvsys.com</sentBy>        <sendTo>http://www.eagleinvsys.com/eagle_ml-2-0_default_cm_control_message</sendTo>        <creationTimestamp/>    </header>    <taskIdentifier>        <correlationId>delete_191115_3</correlationId>        <businessTaskId>delete_191115_3</businessTaskId>    </taskIdentifier>    <taskTypeEnum>LOAD</taskTypeEnum>    <taskParameters>        <taskParameter>            <name>StreamName</name>            <dataType>S</dataType>            <value>eagle_ml-2-0_default_cm_execwkfl</value>        </taskParameter>         <taskParameter>            <name>ActionType</name>            <dataType>S</dataType>            <value>EXECUTE</value>        </taskParameter>        <taskParameter>            <name>WorkflowName</name>            <dataType>S</dataType>            <value>eagle_wrf_generic_delete</value>        </taskParameter>        <taskParameter>            <name>WorkflowData</name>            <dataType>S</dataType>            <value>_EAGLEML_DELETE_DATA.zip</value>        </taskParameter>    </taskParameters></EagleML>

Required Parameters

NOTE: Parameter names are case-sensitive.
The following table lists parameters that must be defined in each Control Message file used for the data delete.

Parameter

Example of Value

Comments

ActionType

EXECUTE

Constant value to start the solution.

StreamName

eagle_ml-2-0_default_cm_execwkfl

Constant value for all extracts.The name of the message stream to which data is sent from the Control Message stream. This stream runs the solution.

WorkflowName

eagle_wrf_generic_delete

Constant value for the data delete solution.

The following table lists required parameters to start the data delete solution with the WorkflowData parameter.

Parameter

Example of value

Comments

WorkflowData

_EAGLEML_DELETE_DATA.zip

Name of the archive to be deleted.

DeliveryMethod

FILE or FTP

Location of the archive to be deleted, if the FILE method is specified.
The archive should be in local directory that is specified by the parameter (:w_staging_in_folder(smile) [Default value: cmw\in]. If FTP method is used, the archive should be in the FTP directory specified by the parameter (:FTP_FILES_LOCATION(smile)[Default value: CMW/inbound].
These parameters are set in the w_config.inc and w_config_custom.inc configuration files.

The following table lists required parameters to start the data delete solution with Base64 data.

Parameter

Example of value

Comments

FileName

_EAGLEML_DELETE_DATA.zip

Name of the archive to be loaded.

Data

 

Archive data in Base64 format.

BACK TO TOP

Default Parameters

The following table lists default parameters for the data delete.

Parameter

Comments

SendNotification

For more details, see
http://eagle.helpdocsonline.com/ejm-jobs-notifications

ReplyDeliveryMethod

 

ACKDeliveryMethod

 

CustomReplyLocation

 

CustomAckLocation

 

 BACK TO TOP
 

  • No labels