In some workflows, the solution requires handing over a variable from one object to another. This article helps you understand the general concept of sharing variables in IWS.
How to share variable from one task to another?
Let's have a look at the following example with two translators: shared_var_test_1 and shared_var_test_2. We want to share a variable (called variableA) from one translator to another.
To do that, three steps have to be taken
Step 1: Declare the variable as "output variable" in the source shape
This is done simply by typing the variable name (or comma-separated list of names) in the OutParams property of the source shape:
Step 2. Instruct the target shape to receive this new variable as input.
Click on the second task and in the CustomCMParams property set the name of the variable in the first column.
It does not have to be same variableA. You can use another alias for the target shape.
In the second column you should use the following construct:
EXPR#:param_TASK_[name_of_task]_[original_name_of_shared_parameter]:
EXPR#:param_TASK_ is a required prefix. [name_of_task] is the name of the task where shared variable was created (shared_var_test_1 in our example). And variableA is the original name of the shared variable.
Note
There are three default variables generated by each shape: :TASK_[name_of_task]_STATUS:, :TASK_[name_of_task]_CORRID: and :TASK_[name_of_task]_CORRID: . Such variables do not require 'param_' prefix in front.
Final expression for our example:
EXPR#:param_TASK_shared_var_test_1_variableA:
Step 3. In the source shape, make the variable visible to the whole workflow.
This step differs depending on the type of source shape.
Expand corresponding link below to see specific details
Drop the Code shape from left panel in ADVANCED group and set value of the Code shape as
:varTaskParams: := :varTaskParams: + 'variableA;' + :variableA: + '!'
If you need to share more variables you can add them to the Code shape using syntax variable_name;variable_value!. For example, if we have another variable count to share, the Code shape value is set like this:
:varTaskParams: := :varTaskParams: + 'variableA;' + :variableA: + '!' + 'count;' + :count: + '!'
Your final picture should look like this
Step A: Drop a Variable shape onto the worksheet. It represents the variable you are going to share. Drop a Call Include shape from the left panel in ADVANCED group and click the Browse button next to the File property in the right panel
Step B: Drop a Call Include shape from the Advanced section of the toolbox, and type the following text in its File property:
../eagle_ml-2-0_cm/w_config.inc
Or, click the "ellipsis" button to select the file from the open dialog.
Step C: Drop the Code shape from left panel in group ADVANCED after the variable box and set value of the Code shape as
:CorrelationId: := SubString(:FILE_NAME:, Find(:FILE_NAME:, '-', 0, 2) + 1); :CorrelationId: := SubString(:CorrelationId:, 0, Find(:CorrelationId:, '_'));
Step D: Drop a Call Include shape from the Advanced section of the toolbox, and type the following text in its File property:
../eagle_ml-2-0_cm/get_w_state.inc
Or, click the "ellipsis" button to select the file from the open dialog.
Step E: Drop another Code shape and set its value as:
If you need to share more variables you can add them to the Code shape using variable_name;variable_value! syntax. For example, if we have another variable count to share, then the Code shape value will be as follows
IF (find(:varTaskParams:, 'variableA;') = -1) then :varTaskParams: := :varTaskParams: + 'variableA;' + :variableA: + '!';
Step F: Drop the second Call Include shape and type or select file ../eagle_ml-2-0_cm/upd_w_state.inc
after all these additions you should have something similar to this:
To verify that new variables are passed to the target shape, run your workflow and check the Control Message tab in the Monitoring Tool.
You should be able to see your new variables as input parameters in the RTR:
Add Comment