Schedule Generic Load Profile on Eagle17 regions

To configure scheduled execution of profiled generic load use following steps:

1. Open Automation Center and create new event based on workflow_restart rule and workflow_restart sch file.
   
2. Event Type field should be set manually (Message Stream Process) or chosen from the expand list;
3. Enter an Event Name.
4. Choose the found event and click OK
   
5. Enter a schedule name and click Next
   If you want to turn on your schedule tick Enabled
   
6. Setup run time and days for workflow schedule and click Next
   
7. Add tag 1176 with value
        {name of created profile}_wrf_generic_load
   This is required to start profiled generic load workflow on schedule execution.
   
   

   Other parameters are optional.

   NOTE: You can use any profile name with tag 1166 (do not forget profile extension .profile in this case) to use execution parameters from the profile to be applied to profiled generic load workflow execution. Using profiled generic load profile is not mandatory and should be skipped because profiled generic load instance is created on profile publish in EJM MT.
   Thus the same profiled generic load once created may be executed with any other EJM profile
8. Set dependencies if needed.
9. Set Notifications if needed.
10. Enable schedule.