Upload XML Data File into a Region via IWS

To upload your XML data file to a region, you can use the "eagle_ml-2-0_default_cm_data_load_cmw_in" stream.

Follow these steps:

1. Open Message Center Editor.
2. Find the stream "eagle_ml-2-0_default_cm_data_load_cmw_in", right click on the stream and select "Send Data…"
   

3. Select your file in dialog window and click send. Your file will be uploaded on the region.

   Run the Load Process for XML ONLY from IWS. Do not start it from the Message Center

4. After Publishing, click to "Run" from top menu under the Raw Service tab in IWS:
   

5. You can set the parameters of load process.
   Delivery method – where is your data file:
   FILE – on current region (should be located in "/cmw/in/" folder);
   FTP/SFTP – on FTP/SFTP server (should be located in folder which was set in parameter: FTP_FILES_LOCATION/SFTP_FILES_LOCATION in "w_config_custom.inc" file).
   File Name – name of data file.
   

6. Click to "Run" in a bottom area.
   The Load processes will be run for all Models. 1 Load Process loads 1 Model.

7. You can run your feed and with file from your machine.
   Switch to tab "Data File":
   

8. Select your file and select "Run":