Control Message Task Parameters - Define ACQUIRE Options

There are several conventional task parameter setups used with the ACQUIRE action type parameter, depending on the type of interface and incoming file.

This page describes the following setups:

Setup for CSV Data Loads

You can load CSV files to the EAGLE data warehouse using the Eagle default generic message streams with the following <taskParameter> paired options:

<name> = ActionType and <value> = ACQUIRE
<name> = StreamName and <value> = eagle_ml-2-0_default_cm_acquire_data
<name> = GICSV and <value> = Eagle_CSV_filename1
<name> = GICSV and <value> = Eagle_CSV_filename2 and so forth

When using the Generic Interface CSV File (GICSV) option, the eagle_default_in_csv_all message stream is used to acquire the CSV file specified by the associated <value> option.

Example: Task Parameter Setup for CSV Data Loads

<taskParameters>
    <taskParameter>
          <name>ActionType</name>
          <dataType>S</dataType>
          <value>ACQUIRE</value>
    </taskParameter>
    <taskParameter>
          <name>StreamName</name>
          <dataType>S</dataType>
          <value>eagle_ml-2-0_default_cm_acquire_data</value>
    </taskParameter>
    <taskParameter>
          <name>GICSV</name>
          <dataType>S</dataType>
          <value>EAGLE_CSV_TRADES.csv</value>
    </taskParameter>
    <taskParameter>
          <name>GICSV</name>
          <dataType>S</dataType>
          <value>EAGLE_CSV_ISSUEPRICE.csv</value>
    </taskParameter>
</taskParameters>

Setup for EagleML Data Loads

You can load EagleML files to the EAGLE data warehouse using the default EagleML message streams with the following <taskParameter> paired options:

<name> = ActionType and <value> = ACQUIRE
<name> = StreamName and <value> = eagle_ml-2-0_default_cm_acquire_data
<name> = Option and <value> = EagleML_filename1
<name> = Option and <value> = EagleML_filename2 and so forth

The table below lists the options, descriptions, and execution streams that perform the data load using the EagleML file specified by the associated <value> option.

Note

The options are listed in the order in which they are handled by the pre-processing rule.

Option	Description	Execution Stream	Note
ENTITY	Entity	eagle_ml-2-0_default_in_xml_entity
ISSUER	Issuer	eagle_ml-2-0_default_in_xml_issuer_mi
SMFGENERIC	Security Master	eagle_ml-2-0_default_in_xml_smf_generic	This is typically the SMF option you should use
SECMASTER	Security Master*	eagle_ml-2-0_default_in_xml_smf_mi*	*Reserved for advanced usage. Please discuss with Eagle prior to using.
COUPON	Coupon	eagle_ml-2-0_default_in_xml_reference
FACTOR	Factor	eagle_ml-2-0_default_in_xml_reference
CODECAT	Code Category	eagle_ml-2-0_default_in_xml_reference
CODEVAL	Code Value	eagle_ml-2-0_default_in_xml_reference
REFERENCE	All other Reference data	eagle_ml-2-0_default_in_xml_reference
PRICE	Price	eagle_ml-2-0_default_in_xml_reference
WAREHOUSE	Warehouse data	eagle_ml-2-0_default_in_xml_warehouse_preproc

Example: Task Parameter Setup for EagleML Data Loads

<taskParameters>
    <taskParameter>
          <name>ActionType</name>
          <dataType>S</dataType>
          <value>ACQUIRE</value>
    </taskParameter>
    <taskParameter>
          <name>StreamName</name>
          <dataType>S</dataType>
          <value>eagle_ml-2-0_default_cm_acquire_data</value>
    </taskParameter>
    <taskParameter>
          <name>WAREHOUSE</name>
          <dataType>S</dataType>
          <value>EAGLE_ML_TRADES.xml</value>
    <taskParameter>
          <name>PRICE</name>
          <dataType>S</dataType>
          <value>EAGLE_ML_ISSUEPRICE.xml</value>
    </taskParameter>
</taskParameters>

Setup for STAR Data Loads

You can load STAR tag value files to the EAGLE data warehouse using the Eagle default generic message streams with the following <taskParameter> paired options:

<name> = ActionType and <value> = ACQUIRE
<name> = StreamName and <value> = eagle_ml-2-0_default_cm_acquire_data
<name> = Option and <value> = Eagle_TAGVALUE_filename1
<name> = Option and <value> = Eagle_TAGVALUE_filename2 and so forth

The table below lists the options, descriptions, and execution streams that perform the data load using the STAR tag value file specified by the associated <value> option.

Option	Description	Execution Stream
STARTRADES	Trades	eagle_default_in_star_trades
GISTAR	Generic Interfaces	eagle_default_in_star_all

Example: Task Parameter Setup for STAR Tag Value Data Loads

<taskParameters>
    <taskParameter>
          <name>ActionType</name>
          <dataType>S</dataType>
          <value>ACQUIRE</value>
    </taskParameter>
    <taskParameter>
          <name>StreamName</name>
          <dataType>S</dataType>
          <value>eagle_ml-2-0_default_cm_acquire_data</value>
    </taskParameter>
    <taskParameter>
          <name>STARTRADES</name>
          <dataType>S</dataType>
          <value>EAGLE_TAGVALUE_TRADES.txt</value>
    </taskParameter>
    <taskParameter>
          <name>GISTAR</name>
          <dataType>S</dataType>
          <value>EAGLE_TAGVALUE_ISSUEPRICE.txt</value>
    </taskParameter>
</taskParameters>

Load data using MC2 service

You can load data using MC2 service with the following taskParameter option:

<name> = MC2Load and <value> = Y

<taskParameter>
    <name>MC2Load</name>
    <value>Y</value>
</taskParameter>

This setting can be also applied globally by adding expression below to w_config_custom config file
<COL TAG="W_MC2_LOAD" EXPRESSION="'Y'" />