The necessary I2I functional set is installed as part of the EagleML package. To use it you have to go thru certain configuration steps that depend on the structure of the process for each specific case.

Before you start installing and configuring the I2I , please decide:

• which role is going to be given to the local and which to the remote environment (Extract or Load)

• which delivery methods you are going to use

• find out the name of the remote environment

Navigate to the link relevant for your Choose a relevant case:

Local Extract, Remote Load

Local Extract Settings

FTP and WS delivery methods do not require any streams, just define the following parameters:

If you want to use JMS or MQ, you have to create a separate inbound stream for each of them based on the distribution rule:

Remote Load Settings

For JMS, MQ or FTP you have to create a stream based on the control message rule:

WS delivery method requires only some configuration parameters to be set:

Local Load, Remote Extract

Local Load Settings

For JMS, MQ or FTP delivery methods you have to create streams based on the distribution rule:

If you want to use WS, please define the following parameters:

Remote Extract Settings

For JMS or MQ delivery methods you have to create streams based on the distribution rule:

...

Set specific configuration parameters if you are using custom streams to read RTRs and TSRs:

• w_i2i_delivery_stream

• w_i2i_tsr_reader_stream

Assign LinkIds, if necessary.

Make up a control message and you are ready to go!