...
Enhancements
Enhanced IWS to Allow For Read Only
IWS has been enhanced to allow it to be used in a Read-Only mode in an environment. To leverage this feature, the environment will need to have a System Parameter entry for sys_item 216 where the sys_value is set to "Y". This system setting entry will be automatically included as part of the core Eagle db scripts for new installs as of v2015R1 and will be set to "N" by default. If you are on an earlier version, you can manually add this setting via the Eagle interface in the System Parameters screen located in System Management Center. If the environment has the sys_item 216 with a value of "Y", then IWS will be read only. If the enviornment the environment has the sys_item 216 but the value is anything but "Y" or if the environment does not have sys_item 216 at all, IWS will open in standard mode. For environment set to be read only, you will see an initial warning message alerting you that you are in read only mode in this environment. In addition, "read only mode" displayed at the top of the screen and buttons that are not applicable in read only mode such as save solution are disabled.
This issue was tracked as Item #119452.
...
- Define a global name for a workflow that can be included in the reply messages
- Define a component level name for inclusion in the reply message
- Create a system generated date/time stamp based on the workflow start time for the inclusion in all the reply messages of the workflow
- Define the parent and child names for inclusion in the reply messages (when components are estedtested)
The functionality around custom folders allows you to:
...
Increased List of Properties for Bundle-Based Workflows and Subprocesses
The The list of available properties for bundle-based workflows and subprocesses was increased. The following were added:• CreateConsolidatedTSR• TSRTransformStream •
- CreateConsolidatedTSR
- TSRTransformStream
- SendFailedTSROnly parametersIn
...
- addition, the sendNotification parameter was enhanced. There are now 3 possible values:
...
- ALWAYS, NEVER and ONFAILURE.
This issue was tracked as Item #121224.
Software Fixes
Incorrect IWS Version Information in Help and About
In IWS, when you selected About or clicked on the "?" Help Icon, the IWS version displayed was incorrect. It would always show as version 1.0. The code was updated to resolve this issue. The About and Help will now show the correct IWS version. This version information is also displaeyd displayed on the top right corner of IWS.
This issue was tracked as Item #119617.
...