Understand the Analysis Options

This section describes the analysis options in the Performance Analysis report. See the following figure.

Analysis Options in Performance Analysis Report

These options become available when you click the Analysis option link in the report profile. For more information, refer to Create a Performance Analysis Report Profile. You can also use the Submit with Overrides option to temporarily change analysis options before you submit the report. For more information, refer to Run a Performance Analysis Report on an Ad Hoc Basis.

You can use the analysis options to specify the level of report output results and to define settings used in attribution reports and dynamic performance reports. You cannot define these options until you specify a report rule for the report profile. The following table describes the analysis options.

On this page

1 Options
2 Limit Results Examples
3 Report Outputs from Calculation & Display Level Settings
4 Display and Hide the Total Row

Options

The table below describes the Analysis options.

Option

Option
Calculation & Display Level
Selected level to calculate attribution and display results down to	Specifies the lowest level of the performance model at which the report uses returns and weights to calculate risk, contribution, and attribution statistics. By default, the field displays a value of Total. You must select a level other than Total for a meaningful attribution analysis.
Limit results to the level selected above	If you set the prior field to a performance model level other than Security Level, this option allows you to limit the results you retrieve and display. It determines whether the report displays all results or only displays results down to the level specified in the prior field. If displaying results down to a selected level, you can specify whether the report retrieves security level data for rollup purposes, and whether the report additionally displays security level data. Options include: Do not limit results. (Default) Displays all results. Limit results. Displays report results down to the level specified in the prior field in this section. Does not retrieve security level data so that it can roll up that data. This is the most optimized option, resulting in the fastest report run time. The system processes records for Performance Analysis, Performance Link Analysis, and Risk Statistic field types only down to the same limit level used for the Attribution fields. Selecting this value can result in the processing of many less records and correspondingly faster report run times. However, this option does lead to the limitation that any security level and entity rollup fields included on the report show as blank due to the lack of record processing below the limit level. Limit results, fetch and display securities. Displays report results down to the level specified in the prior field in this section. In addition, retrieves and displays security level data below the selected level. This option allows you to view securities below a performance model level when that level is not the lowest level in the model. The system retrieves records and processes them down to the security level for Performance Analysis, Performance Link Analysis, Performance Risk Analysis, Performance IRR Analysis, Performance Attribution Group, and Global Attribution Group fields even though the report level is limited above the security level. Limit results, fetch but do not display securities. (This option is provided for backward compatibility only.) Displays report results down to the level specified in the prior field in this section, the Selected level to calculate attribution and display results down to field. Does not display security level data, but retrieves security level data so that it can roll up that data. The system retrieves records and processes them down to the security level for Performance Analysis, Performance Link Analysis, and Risk Statistic fields even though the report level is limited to above the security level. The chief benefit of this option is that it allows you to display security and entity fields in rollup fields on Performance Analysis reports. Some examples of report results you receive after selecting these options appear in the next section.
Show attribution inputs below selected level	For attribution reports, do one of the following: Select this check box to display the attribution input weights and returns below the level selected for the calculation of attribution statistics in the Selected level to calculate attribution and display results down to field. Clear the check box to prevent display of the attribution inputs below the selected level. By default, if you set the Limit results to the level selected above field to: Do not limit results, this check box is selected. Limit results, this check box is cleared and unavailable. Limit results, fetch and display securities, this check box is selected and unavailable. Limit results, fetch but do not display securities, this check box is cleared and unavailable.
Suppress benchmark data not held by the profile portfolio	Select this check box to exclude benchmark data in the results for securities where the benchmark includes holdings that the related portfolio does not hold.
Options for Security Returns	Select the type of Security Returns to Process. This enables the user to choose the security type to be processed. The options are Single Position (S), Positions by Strategy (SS), Positions by Strategy and Dictionary Classification (SP). The returns need to be committed independently for each security type through the Perf Calc report or uploaded into the performance tables. The legacy type (S) supports both stored model and dynamic grouping. SP supports grouping only based on stored model. SS potentially supports dynamic grouping. Show Partial Period Assignments option is available for S and SS. Enabling this option would show the security under multiple nodes if the security switches nodes during the reporting period. If SP is chosen in the above checkbox, this option is enabled and made inactive.
Dynamic Performance
Portfolio Look Through	In dynamic performance reports, select this check box to use portfolio look through. This option is available only if you do not select a performance model as the report's grouping rule. For more information, refer to "Invoking Portfolio Look-Through."
Adjust Securities Values to Match Parent	This checkbox becomes active when you select the checkbox for Portfolio Look Through. Check this box to adjust the returns of underlying securities by a drift factor so that they roll up to match the return of the look-through security they replaced.
Apply Filter for Benchmark	In dynamic performance reports, select this check box to apply data filters to the benchmark. This option is available only if you do not select a performance model as the report's grouping rule. For more information, refer to "Classifications, Filters, and Range Rules."

Limit Results Examples

The Limit Results to the Level Selected Above option affects whether you can view security level data directly below intervening performance model levels after you commit data once to a performance model.

Assume you use a performance model that groups data by Total / Region / Country / Security. The following examples illustrate what results display if you select various options for limiting results.

Do not limit results. In the following example, if you select a performance model level of Region and set this option to Do not limit results, you see results like the following.

Total
	North America
		United States
			Security 1
			Security 2
		Canada
			Security 3
			Security 4
	Europe
		France
			Security 5
			Security 6
		Germany
			Security 7

Limit results or Limit results, fetch but do not display securities. In this example, assume you select a performance model level of Region and set this option to Limit Results or to Limit results, fetch but do not display securities. You see results like the following.

	Total
		North America
		Europe

Limit results, fetch and display securities. In this example, you select a performance model level of Region and set this field to Limit results, fetch and display securities. You can see results like the following. Notice that you can see the securities below each region, and those securities are not grouped by Country, the intervening performance model level.

Total
	North America
		Security 1
		Security 2
		Security 3
		Security 4
	Europe
		Security 5
		Security 6
		Security 7

Report Outputs from Calculation & Display Level Settings

The following table summarizes the report outputs that you can produce by combining the following Calculation & Display Level option settings. The report processing shown is designed to provide more recent functions while preserving backward compatibility for existing report profiles.

Field Types Included in Field Rule	Calculate Attribution Statistics at the Level	Limit Results to the Level Selected Above	Show Attribution Inputs Below Selected Level	Report Processing

Field Types Included in Field Rule	Calculate Attribution Statistics at the Level	Limit Results to the Level Selected Above	Show Attribution Inputs Below Selected Level	Report Processing
Mixed Performance Analysis and attribution group	Total or rollup	Do not limit results	Cleared	Data is retrieved to security level, attribution is calculated from selected level, non-attribution data is displayed down to security level.
Mixed Performance Analysis and attribution group	Total or rollup	Do not limit results	Selected	Data is retrieved to security level, attribution is calculated from selected level, all data is displayed down to security level.
Mixed Performance Analysis and attribution group	Total or rollup	Limit results	Cleared (Unavailable)	Data is retrieved to selected level, attribution is calculated from selected level, all data is displayed down to selected level.
Mixed Performance Analysis and attribution group	Total or rollup	Limit results, fetch but do not display securities	Cleared (Unavailable)	Data is retrieved to security level, attribution is calculated from selected level, all data is displayed down to selected level.
Mixed Performance Analysis and attribution group	Total or rollup	Limit results, fetch and display securities	Selected (Unavailable)	Data is retrieved to security level, attribution is calculated from selected level, all data is displayed down to security level.
Mixed Performance Analysis and attribution group	Security	Do not limit results (Unavailable)	Cleared (Unavailable)	Data is retrieved to security level, attribution is calculated from security level, all data is displayed down to security level.
Attribution group only	Total or rollup	Do not limit results	Selected	Data is retrieved to security level, attribution is calculated from selected level, all data is displayed down to security level.
Attribution group only	Total or rollup	Limit results	Cleared (Unavailable)	Data is retrieved to selected level, attribution is calculated to selected level, all data is displayed down to selected level.
Attribution group only	Total or rollup	Limit results, fetch and display securities	Selected (Unavailable)	Data is retrieved to security level, attribution is calculated from selected level, all data is displayed down to security level.
Attribution group only	Security	Do not limit results (Unavailable)	Cleared (Unavailable)	Data is retrieved to security level, attribution is calculated to security level, all data is displayed down to security level

Display and Hide the Total Row

All Performance analysis reports are displayed without the Total row. This makes the report more consistent with other OLAP reports.

You can choose to display the Total row using the Include TOTAL row in results option as shown in the following figure. Click Options from the second step of the report profile.

If you have an Advanced Report created prior to Release 9.0 that is based on a Performance Analysis report, hiding the Total row may cause the Advanced Report to fail. By default, any existing report created before Release 9.0 displays the Total row to avoid this issue. Only new Performance Analysis reports created in Release 9.0 or later have the Total row hidden by default.

Set Report Thresholds for Entities and Time Periods

You can set report thresholds for Performance Analysis reports to control the number of entities and time periods used when running the report to provide a more manageable response time and to eliminate scenarios where reports run for unacceptable times and/or finish unsuccessfully. For example, you may want one report to run for hundreds of entities for any time period while intend another report to run for one entity for a maximum of one year.

If you run a report and exceed a report threshold, the report fails with an error message that identifies the threshold limit.

Be aware that the Performance System Parameter, Sys Item 28, Maximum number of entities in performance data fetch, is available as a system-wide parameter that can help to optimize overall report time. This parameter specifies the maximum number of entities allowed per query in the performance data fetch associated with the Performance Analysis report, along with other reports. It allows queries to run more predictably when you run the Performance Analysis report for complex queries, such as those used for Data Mart builds or on an ad hoc basis. For details, refer to the Performance System Parameters section of the Performance Calculation User Guide.

To set report thresholds for a Performance Analysis report profile:

Select the Create/Edit Performance Analysis report Step 2 dialog box, as described in "Creating a Performance Analysis Report Profile", and click Options.
The Report Options dialog box appears.
Select the Set Report thresholds check box.
The Set Report thresholds dialog box appears.
In the Entity thresholds field, specify the maximum number of entities for which to run the report. The field displays a default value of 0 (zero), indicating an unlimited number of entities are acceptable. For LIST-type entities, the system enumerates the LIST-type entities before it applies the threshold. For composites, the system counts the entities and applies them towards the threshold before it enumerates them.
In the Date range threshold in days field, specify the maximum of days for which to retrieve time series data when running the report.
The field displays a default value of 0 (zero), indicating an unlimited number of days are acceptable.