As was described in usage section, «check» command is used currently only for port range check.
Basic command syntax:
cmdmgr.exe check [-verbose|-v] --item=ports first_port=<port1> last_port=<port2>
This command has such parameters:
- verbose(v) – flag for printing detail info about availability of each port in range;
- item – item for check, currently only «ports» item supported;
- first_port, last_port – this is port range bounds.
Example:
cmdmgr.exe check -v -item=ports first_port=20000 last_port=22100
Figure 2. Check command example.
0 Comments