Monitor Ingested Data in Raw Service Loads

In the EJM Monitoring Tool, you can review the data loaded using the Raw Service tool.

To view and reprocess ingested data:

1. Click the Dimensions tab.
2. In the Schema Name box, select the schema name you used in your Raw Service feed definition.
   

3. In the Batch ID list box, select the Batch ID you are interested in.
   You can click the arrow to expand the list and see all the batch IDs available along with load timestamps.
   
   The Schema Name and Batch ID values are required for any query. After you populate them, the Apply button becomes enabled.

   After you select the schema, Monitoring Tool checks the schema for any key fields specified in its definition, and may display them in the query screen as additional filtering controls.

4. Click Apply. 

   You see the requested data displayed in the grid.
   
5. In the lower pane, you can click the Errors tab to view any errors that occurred during the load. Clicking the Locate link locates the corresponding cell in the grid.
6. You can modify the values in any cell, then click the Edits tab and resubmit new data by either selecting specific records, or all modified records.
   
   The Raw Service tool processes the resubmitted data as a new Batch, and the upper grid displays the results of the processing, as shown in the following figure.