Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Overview

There may be a requirement to shut off accruals for a security or position in Eagle Accounting for market or operational reasons. The most common drivers are going into default, being priced dirty in the market, or having an unsupported accrual calculation.

One option to support these scenarios is to set up the security with a fixed rate of 0%, which will generate accrued interest of zero on a daily basis. In cases where manipulating the market reference data is not feasible, another option is to put the security or position in default. This allows you to suppress accruals, amortization/accretion, and/or OID. Additional details are available in Understand Default Bonds.

Putting a security in default is a two-step process that involves populating fields on the security master file (SMF) and adding Debt Default Periods. This can create challenges for automation as most clients do not have an existing source that can generate the Debt Default Period messages.

This document describes a local workaround that can be implemented to add Debt Default Periods automatically during security creation when the security is created simply by setting Default Indicator (1551) = Yes. The process works when the security is set up via automation with a message or manually in Issue Viewer.

Assumptions

This process will create Debt Default Periods with:

  • Add Periods Based On (1256) = Security

  • Accounting Basis (21) null

    • While this field is required in the panel for security-level records, it is not required on the underlying event and testing confirms accruals are successfully suppressed when it is left null

  • Default Type (1551) = Income

The same general process could be used with other elections for the fields above, but it would require adjustments to the logic and/or additional fields on the SMF panel.

Securities created in Reference Data Center will not invoke this process.

Implementation

Step 1: Copy Create Debt Default Period Panel to Lookups Folder

The Create Debt Default Period panel (pan-adefaulttype.htm) has logic to change the Event Type (55) between ADD_POS_DEFAULT and ADD_SEC_DEFAULT depending on whether a position-level or security-level record is being added. However, the default Submessage in the panel’s Global Properties, which is also the default Event Type, is ADD_POS_DEFAULT.

When a panel is called as a lookup (from another panel), the default Submessage (Event Type) is always used regardless of the panel logic and what is mapped to it. For this reason, we need a copy of the panel with a default Submessage of ADD_SEC_DEFAULT.

  1. Open Web Panel Designer

  2. Navigate to eagle > star > reference > Debt Default Periods

  3. Right-click Add Debt Default Periods/Inhibit Earnings and select Copy

  4. Navigate to eagle > star > LOOKUPS

  5. Right-click LOOKUPS and select Paste as

  6. Name the panel pan-adefaulttype-sec.htm

  7. Open the panel and change to Overlay edit mode

  8. Click Global Properties…

  9. Change Submessage to ADD_SEC_DEFAULT and click OK

  10. You will receive a message asking if you want to change the default value for tag 55

  11. Click Yes

  12. Save your changes

Step 2: Update Panel for Adding Multi-Leg Swaps

Once we have a panel that can create the appropriate records when called as a lookup, we can add the logic to call that panel from the Multiple Leg Swap panel (pan-addsecmastermultilegswap.htm). There are also tweaks to allow Default Indicator (1551) and Default Date (10142) to be set independently on each leg when creating a swap manually via Issue Viewer. Currently the values are entered on the contract and then propagated down to the legs.

  1. Open Web Panel Designer

  2. Navigate to eagle > star > reference > Add/List Issue

  3. Open Multiple Leg Swap and change to Overlay edit mode

  4. Click the …LISTBOX tab

  5. Under the Link ID column, locate 3931i

  6. In the first Script section, remove L1551 and L10142 from the “Before” line below

    1. Before: IF :4590: != "C" THEN SET(L14,L1432,L38,L1551,L10142,L3997,L3998);

    2. After: IF :4590: != "C" THEN SET(L14,L1432,L38,L3997,L3998);

  7. Under the Link ID column, locate 1551i

  8. Comment out the whole existing Script section:

    1551i	!Script	
    1551i	!Defentry	:1551:
    1551i	!class	global
    1551i	!Text	Loop(:vi:, :0:1551:, :0:1551:) [
    1551i	!Text	Loop(:vl:, :0:1551:, :0:1551:) [
    1551i	!Text	IF Not(IsEmpty(:vi:)) AND :vi:!=:vl: THEN FORCE(:vl:,:vi:)
    1551i	!Text	];
    1551i	!Text	];
    1551i	!End	
  9. Add this new Script section before the one we just commented out:

    1551i	Script	
    1551i	Defentry	:1551:
    1551i	Text	IF :1551: = "Y" AND :68: != "" THEN ASSIGN(:10142:,:68:);
    1551i	End	
  10. Under the Link ID column, locate 10142i, which should immediately follow 1551i

  11. Comment out this whole section:

    10142i	!Script	
    10142i	!Defentry	:10142:
    10142i	!class	global
    10142i	!Text	Loop(:vi:, :0:10142:, :0:10142:) [
    10142i	!Text	Loop(:vl:, :0:10142:, :0:10142:) [
    10142i	!Text	IF Not(IsEmpty(:vi:)) AND :vi:!=:vl: THEN FORCE(:vl:,:vi:)
    10142i	!Text	];
    10142i	!Text	];
    10142i	!End	
  12. Under the Link ID column, locate 7705i

  13. Copy and paste the code from the Multiple Leg Swap tab of the attached spreadsheet to the end

  14. Save your changes

Step 3: Update Panel for Editing Multi-Leg Swaps

There are separate panels for adding and editing multi-leg swaps. If we want to be able to invoke this process for existing securities, we need to apply similar changes to Edit Multiple Leg Swap (pan-editsecmastermultilegswap.htm).

  1. Open Web Panel Designer

  2. Navigate to eagle > star > reference > Add/List Issue

  3. Open Edit Multiple Leg Swap and change to Overlay edit mode

  4. Click the …LISTBOX tab

  5. Under the Link ID column, locate 3931i

  6. In the fifth Script section, remove L1551 and L10142 from the “Before” line below

    1. Before: IF (RefRow(:vThisRef:)!=1) THEN SET(L14,L1432,L38,L1551,L10142,L3997,L3998);

    2. After: IF (RefRow(:vThisRef:)!=1) THEN SET(L14,L1432,L38,L3997,L3998);

  7. Complete items 7-11 from Step 2 above for this panel

  8. Under the Link ID column, locate 7705i

  9. Copy and paste the code from the Edit Multiple Leg Swap tab of the attached spreadsheet to the end

  10. Save your changes

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.