Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Before you start installing and configuring the I2I please decide:

  • which role is going to be given to the local and which to the remote environment (Extract or Load)
  • which delivery methods you are going to use
  • find out the name of the remote environment

Navigate to the link relevant for your case:

Local Extract, Remote Load

Local Extract Settings

FTP and WS delivery methods do not require any streams, just define the following parameters:

If you want to use JMS or MQ, you have to create a separate inbound stream based on the default distribution rule:

 For JMS (click to expand):


 For MQ (click to expand):


Remote Load Settings

For JMS, MQ or FTP you have to create a stream on the base of default control message rule:

 For JMS (click to expand):


 For MQ (click to expand):


 For FTP (click to expand):


WS delivery method requires only some configuration parameters to be set:


Local Load, Remote Extract

Local Load Settings

For JMS, MQ or FTP delivery methods you have to create streams based on the default distribution rule:


 For JMS (click to expand):


 For MQ (click to expand):


 For FTP (click to expand):


If you want to use WS, please define the following parameters:

Remote Extract Settings

For JMS or MQ delivery methods you have to create streams on the base of default distribution rule:


 For JMS (click to expand):


 For MQ (click to expand):


FTP and WS delivery methods require specific configuration parameters:

  • No labels