Before you start installing and configuring the I2I please decide:

• which role is going to be given to the local and which to the remote environment (Extract or Load)
• which delivery methods you are going to use
• find out the name of the remote environment

Navigate to the link relevant for your case:

Local Extract, Remote Load

Local Extract Settings

FTP and WS delivery methods do not require any streams, just define the following parameters:

If you want to use JMS or MQ, you have to create a separate inbound stream for each of them based on the distribution rule:

Remote Load Settings

For JMS, MQ or FTP you have to create a stream based on the control message rule:

WS delivery method requires only some configuration parameters to be set:

Local Load, Remote Extract

Local Load Settings

For JMS, MQ or FTP delivery methods you have to create streams based on the distribution rule:

If you want to use WS, please define the following parameters:

Remote Extract Settings

For JMS or MQ delivery methods you have to create streams based on the distribution rule:

FTP and WS delivery methods require specific configuration parameters: