Page Comparison

EagleML and EJM require a series of infrastructure message streams. This page describes how to verify in the Message Center Console that all of the required streams are installed and enabled and which message streams are required.

Info

title	Note

The first time you install the monthly EagleML package In an environment, this check should be performed. It is not required for subsequent installs. This is applicable to both the automated and the manual install processes.

While this step is optional on subsequent installs, it may be conducted after each install as an additional verification point for manual installs.

In this page:

...

Open the Message Center Console in your Eagle environment.
Click the Message Streams tab in the Message Center Console main window.
The Streams Query dialog box will be displayed.
In the Title text box, enter eagle_ml and click SEARCH.
All of the message streams with the name eagle_ml will be displayed.
Check that the required streams are listed.
Check that the Stream Statuses for all of the required streams are shown as Enabled.

Info

title	Note

If you are installing the EagleML package for the first time on an environment that has Eagle versions 12.x, 13.x or V15R2.x, the streams will all be disabled and you will need to enable them.

...

Info

title	Note

While reviewing the streams, you may also verify want to verify the instance id on the Message Stream properties.

Anchor

...

Streams

...

Streams
Required Message Streams

The following table lists the stream ID, stream name, and description of the infrastructure streams installed with the EagleML/EJM Monthly Install.

...

This stream uses a preprocessor rule file (*.prf), to sequentially execute the transformation step from CSV to EagleML(XMLDBAPI)[SINGLE mode] and send a result message to the load step to the streameagle_ml-2-0_default_in_xml_warehouse or eagle_ml-2-0_default_in_xml_warehouse_preproc.

Stream Count

Stream Category	Count
EGL_EJM

126

129

EGL_EagleML

27

31
EGL_ExtractService	5
EGL_IWS

19

20
EGL_Generic	16
EGL_SSC	1
MC_INSTALL

24TOTAL218

...

TOTAL	226
23
EGL_PROD_PAR (Uncategorized)	2
EIS	1

Anchor

	Streams
	Streams

Stream

Title

Name	Stream Category

MC2 Related

Comments	Stream Description
eagle_default_

bbca

secmaster_

helper

resolution

EGL_

Generic

EagleML

This stream

performs transformation of the Bloomberg Corporate Actions to TagValue format

is used to translate the non-standard identifiers in the requestor file into vendor accepted identifiers, so that the vendor may identify the security

eagle_

default_csv_raw_data_load

mc_alerts

EGL_

Generic

EagleML

This stream is used to

load Global Values (Columns)eagle

send email alerts by MsgDetailId

eagle_ml-2-0_default_

deploy

cm_exec_

demand

eds

MC

EGL_

INSTALL

EagleML

This stream is used to

deploy the rules and services manuallyeagle_default_deploy_restart_mcMC_INSTALLThis stream is designed to restart MC services while deploying a snapshot or a release packageeagle_default_deploy_serviceMC_INSTALL

execute any types of EDS processes.
eagle_ml-2-0_default_cm_profiled_load_validation	EGL_EagleML	This stream validates profiled generic load results.
eagle_ml-2-0_default_cm_refresh_engine_cache	EGL_EagleML	This stream is used to

deploy services

automate engine cache clearing during runtime

eagle_ml-2-0_default_in_

deploy

xml_acct_

support

cash

MC

EGL_

INSTALL

EagleML

This stream is

intended for back up operations during installation.
For example: stopping MCCOMMANDEXECUTOR, checking the installed version of the component, checking free disk spaceeagle_default_extractor_demandEGL_EJM

used to load the Accounting Cash objects
eagle_ml-2-0_default_in_xml_acct_cash_no_split	EGL_EagleML		This stream is used to

run the data extraction manually

load accounting cash objects.The incoming messages are processed sequentially in the order in which they are in the data file

eagle_ml-2-0_default_in_xml_

file

acct_

distribution

trades

EGL_

EJM

EagleML

This stream is used to

deliver files using external connection. Only FTP delivery type supported. (Note: it is part of eagle_ml_file_distribution package).eagle_default_file_indexerEGL_IWSThis stream identifies all references between different rules and creates a dependency tree for internal use in EBS/IWS/MTeagle_default_file_move_or_copyEGL_IWS

load the Accounting Trade objects
eagle_ml-2-0_default_in_xml_acct_trades_no_split	EGL_EagleML	This stream is used to load Accounting Cash objects sequentially
eagle_ml-2-0_default_in_xml_costbasis_adj	EGL_EagleML	This stream is used to

copy or move the file to a specified destination directory. It is primarily used by the "task move" shape in IWS. eagle

load the Cost Basis Adjustment object

eagle_ml-2-0_default_in_xml_ent_

csv

no_

warehouse

split

EGL_

Generic

EagleML

This stream

uses a preprocessor rule file (*.prf), to sequentially execute the transformation from CSV to EagleML(XMLDBAPI)[BATCH mode] and send a result message for load to the stream

is used to load the Entity objects sequentially

eagle_ml-2-0_default_in_xml

_warehouse or eagle

_entity	EGL_EagleML		This stream is used to load the Entity objects
eagle_ml-2-0_default_in_xml_

warehouse_preproceagle

impairments	EGL_EagleML		This stream is used to load the Impairments object
eagle_ml-2-0_default_in_

csv

xml_

warehouse

issuer_

sm

mi

EGL_

Generic

EagleML

This stream

uses a preprocessor rule file (*.prf), to sequentially execute the transformation from CSV to EagleML (XMLDBAPI) [SINGLE mode]
and send a result message for load to the stream eagle

is used to split the Generic Issuer file into several Issuer files and route them to the eagle_ml-2-0_default_in_xml_

warehouse or

reference stream

eagle_ml-2-0_default_in_xml_

warehouse

ref_

preproceagle

ext

eagle_default_in_csv_warehouse_tEGL_GenericThis stream performs transformation from CSV to EagleML(XMLDBAPI)

EGL_EagleML		This stream is used to load the extended schedule objects
eagle_ml-2-0_default_in_xml_ref_no_split	EGL_EagleML		This stream is used to load the Reference objects. The incoming messages are processed sequentially in the order in which they are in the data file
eagle_ml-2-0_default_in_

csv

xml_

warehouse_upsert

reference

EGL_

Generic

EagleML

This stream

uses a preprocessor rule file (*.prf), to sequentially execute transformation from CSV to EagleML(XMLDBAPI)[UPSERT mode] and send a result message for load to the stream

is used to load the Reference objects

eagle_ml-2-0_default_in_xml

_warehouse or

_smf_custom	EGL_EagleML	Obsolete	This stream was used to load the customSMF object. It is obsolete, but documented for backwards compatibility.
eagle_ml-2-0_default_in_xml_smf_

warehouse_preproceagle

generic	EGL_EagleML		This stream is used to load the Generic SMF object
eagle_ml-2-0_default_in_xml_

pipe

smf_

performanceCLP

mi

EGL_

Generic

EagleML

This stream

uses a preprocessor rule file (*.prf), to sequentially execute the transformation step from PIPE Performance to EagleML and sends a result message for load to the stream

is used to split the Generic SMF file into several Reference and SMF files and route them to the eagle_ml-2-0_default_in_xml

_warehouse_preproceagle

_smf_generic and eagle_ml-2-0_default_in_xml_reference streams

eagle_ml-2-0_default_in_

pipe

xml_

performanceCLP_t

user

EGL_

Generic

EagleML

This stream

performs PIPE Performance to EagleML transformation

is used to load the User objects

eagle_ml-2-0_default_in_

pipe

xml_

pos

warehouse

EGL_

Generic

EagleML

This stream

uses a preprocessor rule file (*.prf), to sequentially execute the transformation step from PIPE Position to EagleML and sends a result message for load to the stream

is used to load the Warehouse objects (XMLDBAPI format)
eagle_ml-2-0_default_in_xml_warehouse_preproc	EGL_EagleML	This stream is used to load the Warehouse objects (EagleML format)
eagle_ml-2-0_default_in_

pipe

xml_

pos_t

washsale

EGL_

Generic

EagleML

This stream

performs PIPE Position to EagleML transformation

is used to load the Accounting washSale object

eagle_ml-2-0_default_

nuggetizer

out_

restart

q

EGL_

EJM

EagleML

This stream is

used to restart the Eagle Nuggetizer. The Eagle Nuggetizer is a schedule-based workflow and is run by a defined schedule. The Eagle Nuggetizer Workflow runs the

the first stage of the data export and manages the query process within the EJM framework

eagle_ml-2-0_default

_cm_nuggetizer’ stream, which collects EagleML files, concatenates them into nuggets and sends it for further processingeagle_default_raw_common_values_loadEGL_GenericThese streams are used to load Global Values (Columns)eagle_default_raw_create_tableEGL_Genericeagle_default_raw_create_viewEGL_Genericeagle_default_raw_data_header_loadEGL_Genericeagle_default_rollbackMC_INSTALLThis stream is designed to roll back to a later version after installing an earlier version.
For the case when the previous version of EagleML is installed, the files in the package are compared by the manifest. If there are no such files in the installed package, they are deleted from the backend.eagle_default_secmaster_resolutionEGL_EagleMLThis stream is used to translate the non-standard identifiers in the requestor file into vendor accepted identifiers, so that the vendor may identify the securityeagle_default_ruleserviceEGL_ExtractServiceMC2

This stream are used to execute requests in pyruleservice. It executes the mc2_service_client.py Python script that uses the RTR sent to the stream and creates a TSR. It also saves the RTR and TSR information in the orchestration tables to show it as an EJM task.

eagle_iws_ruleserviceEGL_ExtractServiceMC2eagle_iws_cacheEGL_IWSThis stream is used to cache IWS resourceseagle_iws_delete_fileEGL_IWSThis stream is used by IWS to remove local fileseagle_iws_eagleml_panelEGL_IWSThis stream is used by IWS to interact and execute the Xpanelseagle_iws_export_solutionEGL_IWSThis stream compiles IWS solutions with the Java tool on the back-endeagle_iws_export_solution_mcpkgEGL_IWSThis stream compiles IWS solutions and sends the pkg files for the processed IWS solutioneagle_iws_find_and_get_fileEGL_IWSThis stream is used by IWS to locate fileseagle_iws_get_fileEGL_IWSThis stream is used by IWS to download fileseagle_iws_import_streamEGL_IWSThis stream installs streams while migrating MC packageseagle_iws_import_stream_requestEGL_IWSThis stream is used by IWS to start the import process requestseagle_iws_import_stream_wEGL_IWSThis stream uses files processed by the eagle_iws_import_stream_request and starts the process of the stream installationeagle_iws_infoEGL_IWSThis stream is the IWS authorization streameagle_iws_list_filesEGL_IWSThis stream is used by IWS to download the list of files for a specific directoryeagle_iws_monitoring_apiEGL_IWSThis stream is used by the EJM Monitoring Tool to download task statisticseagle_iws_rename_fileEGL_IWSThis stream is used by IWS to rename solution fileseagle_iws_save_fileEGL_IWSThis stream is used by IWS to upload files to the boxeagle_iws_server_installerMC_INSTALLThis stream uses the eagle_iws_import_stream_w to the install processed streamseagle_iws_server_supportMC_INSTALLThis stream uses the eagle_iws_import_stream_w to copy source files for installing streamseagle_iws_service_data_emptyEGL_EJMThis stream is used to group rule and include files that do not require an execution streameagle_iws_shellEGL_IWSThis is the IWS utils streameagle_mc_alertsEGL_EagleMLThis stream is used to send email alerts by MsgDetailIdeagle_mc_import_stream_requestMC_INSTALLThis stream is used to send a combined zip with a .files.b64 and a .pkg.b64 files to the mc_import_stream_w streameagle_mc_import_stream_wMC_INSTALLThis stream is used to import streams. The incoming file is a ZIP which has two types of files:
*.files.b64 - a base64 encoded ZIP with files to be installed, starting from estar/
*.pkg.b64 - a base64 encoded ZIP with *.pkg files to create the streams.
The process first copies the files then runs the installation scripts for .pkgeagle_mc_import_support_dataMC_INSTALLThis stream is used to load sources/code categories/code values/code transaction objecteagle_mc_server_installerMC_INSTALLThis stream is used to deploy a snapshot or a releaseeagle_mc_server_installer_ftpMC_INSTALLThis stream is used to deploy a snapshot or a release from FTPeagle_mc_server_installer_mqMC_INSTALLThis stream is used to read JMS/MQ and send files to the appropriate streameagle_mc_server_installer_mq_decoderMC_INSTALLThis stream is used to decode base64 file to zip archive and send the zip to eagle_mc_server_installereagle_mc_server_supportMC_INSTALLThis stream is used to perform basic commands during deployment. For example CHMOD, MKDIR, REINIT etc.eagle_mc_server_support_amq_monitorMC_INSTALLThis stream is used to send email notifications about actual stream information. The stream is out of date. It is maintained for backward compatibility.eagle_mc_server_support_import_dataflowMC_INSTALLThis stream is used to install the Data Vendor Console dataflowseagle_mc_server_support_import_streamMC_INSTALLThis stream is used to import a stream package in Message Centereagle_mc_server_support_jmsMC_INSTALLThis stream is used to perform basic commands for JMS using broadcast. This stream also performs eagle_mc_server_support_jms_exec in all instances.eagle_mc_server_support_jms_execMC_INSTALLThis stream is used to perform basic commands for JMS. For example: JMSSTATUS, JMSLIST, JMSSTOP, JMSSTART, JMSPROCINFO etc.eagle_mc_server_support_reporterMC_INSTALLThis stream is used to send Outbound Topic of Build Installation LOG fileseagle_mc_stream_installerMC_INSTALLThis stream is used to install streams from zip archive. It is the old version of stream installer.

_out_star_extracts	EGL_EagleML		This stream is used to extract data in STAR format
eagle_ml-2-0_default_out_streaming_t	EGL_EagleML		This stream is similar to the eagle_ml-2-0_default_out_t, as this stream is the second stage of the data export and manages the transformation process within the EJM framework. It uses the latest Eagle technology which enables tasks to be executed faster improving throughput
eagle_ml-2-0_default_out_t	EGL_EagleML		This stream is the second stage of the data export and manages the transformation process within the EJM framework
eagle_ml-2-0_default_validatepackage	EGL_EagleML		This stream validates package integrity
eagle_ml-2-0_default_in_xml_sink_schd_manager	EGL_EagleML		This stream is used to manage SINK Schedules
eagle_default_eds_warehouse	EGL_EJM		This stream is used to represent errors in MC from Warehouse object load via pyruleservice correctly and to support reprocessing of failed records.
eagle_default_extractor_demand	EGL_EJM		This stream is used to run the data extraction manually
eagle_default_file_distribution	EGL_EJM		This stream is used to deliver files using external connection. Only FTP delivery type supported. (Note: it is part of eagle_ml_file_distribution package).
eagle_default_nuggetizer_restart	EGL_EJM		This stream is used to restart the Eagle Nuggetizer. The Eagle Nuggetizer is a schedule-based workflow and is run by a defined schedule. The Eagle Nuggetizer Workflow runs the eagle_ml-2-0_default_cm_nuggetizer’ stream, which collects EagleML files, concatenates them into nuggets and sends it for further processing
eagle_iws_service_data_empty	EGL_EJM		This stream is used to group rule and include files that do not require an execution stream
eagle_ml-2-0_default_cm_acquire_data	EGL_EJM		The stream receives the information provided to the control message, adds the end of workflow trigger file and delivers all details of the Load Flow Control stream to orchestrate data loads
eagle_ml-2-0_default_cm_concat	EGL_EJM		This stream concatenates several incoming files into one outgoing with a set name
eagle_ml-2-0_default_cm_construct_request	EGL_EJM		This stream generates the requester file from the EagleML Generic SMF identifiers to load the details from Bloomberg. It is used in the generic_load_enrichment workflow
eagle_ml-2-0_default_cm_control_message	EGL_EJM		This stream receives and parses control messages. The control message is an XML-formatted input message that EJM recognizes and processes as a command to execute a specific message stream, STAR event, or PACE event
eagle_ml-2-0_default_cm_control_process	EGL_EJM		This stream is used to stop / kill workflows or MC streams
eagle_ml-2-0_default_cm_data_file_splitter	EGL_EJM		The main purpose of the this stream is to increase the performance of the incoming GICSV (Generic Interface CSV) formatted files loading by splitting the incoming file into several smaller and distributing files into Message Center processes in order to run parallel processing
eagle_ml-2-0_default_cm_data_load_cmw_in	EGL_EJM		This stream is a helper stream used by the Message Center Console and Automation Center to deliver data files to the incoming folder (/cmw/in)
eagle_ml-2-0_default_cm_datafile_control	EGL_EJM		This stream reads the trigger file from the eagle_ml-2-0_default_cm_datafile_task and makes a specified copy in the staging folder and then moves it to the specified stream for processing
eagle_ml-2-0_default_cm_datafile_task	EGL_EJM		This stream creates a trigger file with necessary information(stream name, file name, source stream name etc.) and sends it to the stream eagle_ml-2-0_default_cm_datafile_control
eagle_ml-2-0_default_cm_dfa	EGL_EJM	MC2	This stream receives data files for the MC2 workflow execution
eagle_ml-2-0_default_cm_dishub_client	EGL_EJM		These streams are the EagleAccessFTP streams used to execute i2i delivery
eagle_ml-2-0_default_cm_dishub2spoke_client	EGL_EJM
eagle_ml-2-0_default_cm_disribute_to_nuggetizer	EGL_EJM		This stream sends the incoming file into the nuggetizer folder, configured by the W_NGTZR_DIST_FOLDER setting
eagle_ml-2-0_default_cm_ea_ftp_reader	EGL_EJM		This stream performs the following tasks: Sends a request to the database SITESEE about the files received on the FTP; Gets files from the FTP; Updates the status in SITESEE database about the files; and Sends the files for processing to the eagle_ml-2-0_default_cm_control_message stream
eagle_ml-2-0_default_cm_eas_distribution	EGL_EJM		This stream gets EAS alerts as a TSR message, converts the TSR to format in accordance with the list of defined templates and send alerts via mail
eagle_ml-2-0_default_cm_ejm_reporter	EGL_EJM	MC2	This MC2 stream generates acknowledgement and task status reply messages. Task statuses are SUCCESS, FAILED, and NO_DATA (for a data extract that found no database records). This stream is also the last one in the execution sequence (Load Flow Control Rule), posting the processing status of the completed workflow as a success or a failure; this stream also triggers final reporting to the external system by dropping a trigger file to the /REP folder)
eagle_ml-2-0_default_cm_email_distribution	EGL_EJM		This stream is used to distribute the results of the workflow to email
eagle_ml-2-0_default_cm_eofw	EGL_EJM		This stream is last in the execution sequence (Load Flow Control Rule), reporting the processing status of the completed workflow as a success or a failure; this stream also triggers final reporting to an external system by dropping a trigger file into the /REP folder
eagle_ml-2-0_default_cm_execextract	EGL_EJM	MC2	This stream is used to evaluate group condition and fill list of filter values, fill group prefix, build RTR for generic extract based on incoming task parameters, execute asynchronously generic extract workflow as a sub-process using the built RTR.
eagle_ml-2-0_default_cm_exectransform	EGL_EJM	MC2	MC2loadprofileexecutortransformstream
eagle_ml-2-0_default_cm_execute_pace_event	EGL_EJM		This stream is used to invoke a specific PACE event by name
eagle_ml-2-0_default_cm_execute_star_event	EGL_EJM		This stream is used to invoke a specific STAR Accounting event by name
eagle_ml-2-0_default_cm_execwkfl	EGL_EJM		This is the main stream in workflow execution
eagle_ml-2-0_default_cm_extract_validation	EGL_EJM	MC2	This stream validates result of extraction – according to validation definition that should be defined for this task (task if more like framework that will execute validation logic). It is designed to allow clients to validate extract and abort extract delivery in case if extract is invalid – if it lack viable information, if extract differ too much from baseline (or previous day) extract.
eagle_ml-2-0_default_cm_file_distribution	EGL_EJM		This stream is used to deliver files. For example, for i2i workflow
eagle_ml-2-0_default_cm_

acquire

load_flow_

data

control

EGL_EJM

The stream receives the information provided to the control message, adds the end of workflow trigger file and delivers all details of the Load Flow Control stream to orchestrate data loads

	This stream uses a preprocessor rule file (*.prf), to sequentially execute a set of data loads in logical database order, launching the appropriate supported message stream interface for each available input file
eagle_ml-2-0_default_cm_mc2_

concat

healthcheck

EGL_EJM

This

stream concatenates several incoming files into one outgoing with a set name

Message Center stream is used to validate MC2 is up and running, checks the health of MC2

eagle_ml-2-0_default_cm_

construct_request

monitoring

EGL_EJM

This stream

generates the requester file from the EagleML Generic SMF identifiers to load the details from Bloomberg. It is used in the generic_load_enrichment workflow

monitors ALERTS and sends a notification to the eagle_ml-2-0_default_cm_

control_messageEGL_EJMThis stream receives and parses control messages. The control message is an XML-formatted input message that EJM recognizes and processes as a command to execute a specific message stream, STAR event, or PACE event

email_distribution stream if an alert occurs

eagle_ml-2-0_default_cm_

control_process

ndfa

EGL_EJM

This stream is used to

stop / kill workflows or MC streams

initiate EJM workflows based on the file names being dropped in this stream

eagle_ml-2-0_default_cm_

data

ndfa_

file_splitter

exec

EGL_EJM

The main purpose of the this stream is to increase the performance of the incoming GICSV (Generic Interface CSV) formatted files loading by splitting the incoming file into several smaller and distributing files into Message Center processes in order to run parallel processing.

	This stream determines for which workflow the incoming data file is intended and generates an event for this workflow
eagle_ml-2-0_default_cm_

data_load_cmw_in

notif_email

EGL_EJM

This stream

is a helper stream used by the Message Center Console and Automation Center to deliver data files to the incoming folder (/cmw/in)eagle_ml-

transforms the TSR to plain text format and sends it via email

eagle_ml-2-0_default_cm_

datafile_control

nuggetizer

EGL_EJM

This stream

reads the trigger file from the

collects EagleML files, concatenates them into nuggets and sends them for further processing. It is used in the eagle_nuggetizer_workflow

eagle_ml-2-0_default_cm_nuggetizer_

datafile_task and makes a specified copy in the staging folder and then moves it to the specified stream for processing.

recover	EGL_EJM		This stream is used in troubleshooting for the eagle_nuggetizer_workflow. It also purges generic_load_enrichment stream
eagle_ml-2-0_default_cm_

datafile_task

pacepoll

EGL_EJM

This stream creates a trigger file with necessary information(stream name, file name, source stream name etc.) and sends it to the stream

MC2	This stream is used to poll and check the status of Pace reports
eagle_ml-2-0_default_cm_

datafile_control

packer	EGL_EJM		This stream is used to compress files to a ZIP archive
eagle_ml-2-0_default_cm_parallel_

dfa

exec

EGL_EJM

MC2

This stream

receives data files for the MC2 workflow execution.

is part of workflow of loading files in parallel

eagle_ml-2-0_default_cm_

dishub2spoke

purge_

client

archive

EGL_EJM

These streams are the EagleAccessFTP streams used to execute i2i delivery

	This stream is used to purge or archive files from the local and FTP folders
eagle_ml-2-0_default_cm_

dishub

queue_

client

poster	EGL_EJM		This stream is used to add information to the queue
eagle_ml-2-0_default_cm_

disribute

realtime_

to

ejm_

nuggetizer

stat

EGL_EJM

This stream

sends the incoming file into the nuggetizer folder, configured by the W_NGTZR_DIST_FOLDER setting

is used to display information in the EJM task tab correctly and check if the data was processed for the received RTR

eagle_ml-2-0_default_cm_

ea

send_

ftp

to_

reader

wrf

EGL_EJM

This stream

performs the following tasks: Sends a request to the database SITESEE about the files received on the FTP; Gets files from the FTP; Updates the status in SITESEE database about the files; and Sends the files for processing to the eagle_ml-2-0_default_cm_control_message stream.

is used to send data files to the workflow loader when the profiled generic load is used

eagle_ml-2-0_default_cm_

eas_distribution

sequencer

EGL_EJM

This stream

gets EAS alerts as a TSR message, converts the TSR to format in accordance with the list of defined templates and send alerts via mail

is used to check whether to process the message in queue

eagle_ml-2-0_default_cm_

ejm

sequencer_

reporter

cleanup

EGL_EJM

MC2

This

MC2 stream generates acknowledgement and task status reply messages. Task statuses are SUCCESS, FAILED, and NO_DATA (for a data extract that found no database records). This stream is also the last one in the execution sequence (Load Flow Control Rule), posting the processing status of the completed workflow as a success or a failure; this stream also triggers final reporting to the external system by dropping a trigger file to the /REP folder)

stream is used to clean up all the message in the queue for a workflow and to remove the current workflow from the queue

eagle_ml-2-0_default_cm_

email

sequencer_

distribution

sch

EGL_EJM

This stream is used to

distribute the results of the workflow to email.

check messages in the queue and send messages for processing

eagle_ml-2-0_default_cm_task_

eofw

executor

EGL_EJM

This stream

is last in the execution sequence (Load Flow Control Rule), reporting the processing status of the completed workflow as a success or a failure; this stream also triggers final reporting to an external system by dropping a trigger file into the /REP folder

receives the dataflow state from the database and stops processing if the workflow status is a negative acknowledgement (NACK). This stream derives the stream name to execute, using the task type and feed type, and triggers the execution using an ACQUIRE style message stream

eagle_ml-2-0_default_cm_task_

execebs

reporter

EGL_

ExtractServiceMC2This stream is used to execute EBS requestseagle_ml-2-0_default_cm_execute_pace_eventEGL_EJMThis stream is used to invoke a specific PACE event by nameeagle_ml-2-0_default_cm_execute_star_eventEGL_EJMThis stream is used to invoke a specific STAR Accounting event by name

EJM		This stream generates acknowledgement (ACK / NACK) and task status reply messages. Task statuses are SUCCESS, FAILED, and NO_DATA (for a data extract that retrieved no database records). This stream is last in the execution sequence (Load Flow Control Rule), posting the processing status of the completed workflow as a success or a failure. This stream also triggers final reporting to the external system by dropping a trigger file to the /REP folder
eagle_ml-2-0_default_cm_transform_

execwkfl

report

EGL_EJM

This stream is

the main stream in workflow execution

used to transform the TSR

eagle_ml-2-0_default_cm_

file_distribution

tsr

EGL_EJM

This stream is used to

deliver files. For example, for i2i workflow

create and manage dependencies between multiple EJM tasks and oversees the fork and join functionality within the stream flow

eagle_ml-2-0_default_cm_

load_flow_control

unpacker

EGL_EJM

This stream

uses a preprocessor rule file (*.prf), to sequentially execute a set of data loads in logical database order, launching the appropriate supported message stream interface for each available input file

is used to decompress files from any archive type (ZIP,GZIP,TARGZIP,TAR)

eagle_ml-2-0_default_cm_

mc2

unpacker_

healthcheck

exec

EGL_EJM

This

Message Center stream is used to validate MC2 is up and running, checks the health of MC2.

stream collects information about the extracted files from the archive and the update workflow state

eagle_ml-2-0_default_cm_uploader_

monitoring

dlvr

EGL_EJM

This stream

monitors ALERTS and sends a notification to the

is used to send data files to the PACE Uploader for processing

eagle_ml-2-0_default_cm_user_

email_distribution stream if an alert occurs

sync	EGL_EJM		This stream is used to synchronize the userID information defined on Eagle with the credentials required for the MicroStrategy application
eagle_ml-2-0_default_cm_validate_by_

ndfa

xsd

EGL_EJM

This stream is used to

initiate EJM workflows based on the file names being dropped in this stream.

perform the XSD validation of data files

eagle_ml-2-0_default_cm_

ndfa

w_

exec

setup

EGL_EJM

This stream

determines for which workflow the incoming data file is intended and generates an event for this workflow

is used to configure the environment after the first EagleML installation. It creates cmw folders and sets the EagleVersion variable in the w_config_version.inc

eagle_ml-2-0_default_cm_

notif

wrkfl_

email

executor

EGL_EJM

MC2

This stream

transforms the TSR to plain text format and sends it via email

executes the workflow rules

eagle_ml-2-0_default_cm_wrkfl_

nuggetizer

listener

EGL_EJM

MC2

This stream

collects EagleML files, concatenates them into nuggets and sends them for further processing. It is used in the eagle_nuggetizer_workflow.

receives and parses MC2 control messages. The control message is an XML-formatted input message that EJM recognizes and processes as a command to execute a specific message stream, STAR event, or PACE event

eagle_ml-2-0_default_cm_

nuggetizer

wrkfl_

recover

reporter

EGL_EJM

This stream

is used in troubleshooting for the eagle_nuggetizer_workflow. It also purges the generic_load_enrichment.

creates a consolidated TSR for ALL workflows

eagle_ml-2-0_default_cm_xslt_exceptions_

pacepoll

acc

EGL_EJM

MC2This stream is used to poll and check the status of Pace reports

	The XSLT Exceptions stream may be used in workflows after the XSLT transformation for Accounting Transaction object. Its main purpose is to catch exceptions generated by XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errors
eagle_ml-2-0_default_cm_xslt_exceptions_

packer

ent

EGL_EJM

This stream is used to compress files to a ZIP archive

	The XSLT Exceptions stream may be used in workflows after the XSLT transformation for Entity Transaction object. Its main purpose is to catch exceptions generated by XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errors
eagle_ml-2-0_default_cm_xslt_

parallel

exceptions_

execeagle_ml-2-0_default_cm_purge_archiveEGL_EJMThis stream is used to purge or archive files from the local and FTP folders

ref

EGL_EJM

This stream is part of workflow of loading files in parallel

The XSLT Exceptions stream may be used in workflows after the XSLT transformation for the Reference Transaction object. Its main purpose is to catch exceptions generated by the XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errors

eagle_ml-2-0_default_cm_

queue

xslt_exceptions_

poster

wrh

EGL_EJM

This stream is used to add information to the queue

	The XSLT Exceptions stream may be used in workflows after the XSLT transformation for the Warehouse Transaction object. Its main purpose is to catch exceptions generated by the XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errors
eagle_ml-2-0_default_

cm

in_

realtime

xml_

ejm

delete_

stat

objects

EGL_EJM

This stream is used to

display information in the EJM task tab correctly and check if the data was processed for the received RTR

delete records from the database. Supported object type groups include: SMF, Entity, Warehouse, Reference

eagle_ml-2-0_default_in_xml_

cm

delete_

refresh

splitter_

engine

isr_

cache

mi

EGL_

EagleML

EJM

This stream is used to

automate engine cache clearing during runtime

split the Generic Issuer file into several Issuer files and route them to the eagle_ml-2-0_default_

cm

in_

self

xml_

system_checkEGL_SSCThis stream is used to self-check the configuration

delete_objects stream

eagle_ml-2-0_default_in_xml_

cm

delete_

send

splitter_

to

smf_

wrf

mi

EGL_EJM

This stream is used to

send data files to the workflow loader when the profiled generic load is used

split the Generic SMF file into several Reference and SMF files and route them to the eagle_ml-2-0_default_in_xml_

cm

delete_

sequencerEGL_EJMThis stream is used to check whether to process the message in queueeagle_ml-2-0_default_cm_sequencer_cleanupeagle_ml-2-0_default_cm_transform_reportEGL_EJMThis stream is used to transform the TSReagle_ml-2-0_default_cm_tsrEGL_EJMThis stream is used to create and manage dependencies between multiple EJM tasks and oversees the fork and join functionality within the stream floweagle_ml-2-0_default_cm_unpackerEGL_EJMThis stream is used to decompress files from any archive type (ZIP,GZIP,TARGZIP,TAR)eagle_ml-2-0_default_cm_unpacker_execEGL_EJMThis stream collects information about the extracted files from the archive and the update workflow stateeagle_ml-2-0_default_cm_uploader_dlvrEGL_EJMThis stream is used to send data files to the PACE Uploader for processingeagle_ml-2-0_default_cm_user_syncEGL_EJMThis stream is used to synchronize the userID information defined on Eagle with the credentials required for the MicroStrategy applicationeagle_ml-2-0_default_cm_validate_by_xsdEGL_EJMThis stream is used to perform the XSD validation of data fileseagle_ml-2-0_default_cm_w_setupEGL_EJMThis stream is used to configure the environment after the first EagleML installation. It creates cmw folders and sets the EagleVersion variable in the w_config_version.inceagle_ml-2-0_default_cm_wrkfl_executorEGL_EJMMC2This stream executes the workflow ruleseagle_ml-2-0_default_cm_wrkfl_listenerEGL_EJMMC2This stream receives and parses MC2 control messages. The control message is an XML-formatted input message that EJM recognizes and processes as a command to execute a specific message stream, STAR event, or PACE eventeagle_ml-2-0_default_cm_wrkfl_reporterEGL_EJMThis stream creates a consolidated TSR for ALL workflowseagle_ml-2-0_default_cm_xslt_exceptions_accEGL_EJMThe XSLT Exceptions stream may be used in workflows after the XSLT transformation for Accounting Transaction object. Its main purpose is to catch exceptions generated by XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errorseagle_ml-2-0_default_cm_xslt_exceptions_entEGL_EJMThe XSLT Exceptions stream may be used in workflows after the XSLT transformation for Entity Transaction object. Its main purpose is to catch exceptions generated by XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errorseagle_ml-2-0_default_cm_xslt_exceptions_refEGL_EJMThe XSLT Exceptions stream may be used in workflows after the XSLT transformation for the Reference Transaction object. Its main purpose is to catch exceptions generated by the XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errorseagle_ml-2-0_default_cm_xslt_exceptions_wrhEGL_EJMThe XSLT Exceptions stream may be used in workflows after the XSLT transformation for the Warehouse Transaction object. Its main purpose is to catch exceptions generated by the XSLT EditChecks from the transformed message and exclude records with exceptions, which are specified as errorseagle_ml-2-0_default_in_xml_acct_cashEGL_EagleMLThis stream is used to load the Accounting Cash objectseagle_ml-2-0_default_in_xml_acct_cash_no_splitEGL_EagleMLThis stream is used to load accounting cash objects.The incoming messages are processed sequentially in the order in which they are in the data fileeagle_ml-2-0_default_in_xml_acct_tradesEGL_EagleMLThis stream is used to load the Accounting Trade objectseagle_ml-2-0_default_in_xml_acct_trades_no_splitEGL_EagleMLThis stream is used to load Accounting Cash objects sequentiallyeagle_ml-2-0_default_in_xml_costbasis_adjEGL_EagleMLThis stream is used to load the Cost Basis Adjustment objecteagle_ml-2-0_default_in_xml_delete_objectsEGL_EJMThis stream is used to delete records from the database. Supported object type groups include: SMF, Entity, Warehouse, Referenceeagle_ml-2-0_default_in_xml_delete_splitter_isr_miEGL_EJMThis stream is used to split the Generic Issuer file into several Issuer files and route them to the eagle_ml-2-0_default_in_xml_delete_objects streameagle_ml-2-0_default_in_xml_delete_splitter_smf_mi

objects stream
eagle_tba_extract_cons_records	EGL_EJM

This stream is used to clean up all the message in the queue for a workflow and to remove the current workflow from the queueeagle_ml-2-0_default_cm_sequencer_schEGL_EJMThis stream is used to check messages in the queue and send messages for processingeagle_ml-2-0_default_cm_task_executorEGL_EJMThis stream receives the dataflow state from the database and stops processing if the workflow status is a negative acknowledgement (NACK). This stream derives the stream name to execute, using the task type and feed type, and triggers the execution using an ACQUIRE style message streameagle_ml-2-0_default_cm_task_reporterEGL_EJMThis stream generates acknowledgement (ACK / NACK) and task status reply messages. Task statuses are SUCCESS, FAILED, and NO_DATA (for a data extract that retrieved no database records). This stream is last in the execution sequence (Load Flow Control Rule), posting the processing status of the completed workflow as a success or a failure. This stream also triggers final reporting to the external system by dropping a trigger file to the /REP folder

These streams are used to maintain the eagle_wrf_tba workflow. eagle_wrf_tba is a set of five independent workflows that may be run consecutively in straight-through mode or selectively in user/manual execution. The final step of each workflow allows the execution of the next logical series of events to be automated. The eagle_wrf_tba_approve workflow is broadly responsible for matching the records that have been placed in the TRADE_CONSOLIDATION table. The eagle_wrf_tba_process workflow is responsible for processing of each record that that matches others by the means of the consolidationFlag. The eagle_wrf_tba_mgr_alloc workflow allocates consolidated records amongst qualified managers to track the payoffs for each manager
	eagle_tba_extract_mgr_alloc_records	EGL_EJM
	eagle_tba_extract_records_1	EGL_EJM
	eagle_tba_extract_t_mgr_alloc	EGL_EJM
	eagle_tba_group_by_position	EGL_EJM
	eagle_tba_run_cons	EGL_EJM
	eagle_tba_run_earnings	EGL_EJM
	eagle_tba_t_consolidated	EGL_EJM
	eagle_tba_t_mgr_alloc	EGL_EJM
	eagle_tba_t_records_1	EGL_EJM
	eagle_tba_update_status_1	EGL_EJM
eagle_trr_extract_cxl	EGL_EJM		These streams are used to maintain the TRR SWAPS CXL RESET workflow. Multiple swaps may be targeted to be cancelled based on the swap underlying asset. This workflow updates the current reset process where multiple swaps may be targeted to reset based on the swap underlying asset id. This process may be triggered thru panels or automated using IWS via the control message
eagle_trr_extract_qtrr	EGL_EJM
eagle_trr_t_cxl	EGL_EJM
eagle_trr_t_qtrr	EGL_EJM
eagle_trs_common_preproc	EGL_EJM		These streams are used to maintain the eagle_wrf_trs_upsize workflow
eagle_trs_filter_error	EGL_EJM
eagle_trs_reply_t	EGL_EJM
eagle_trs_t_csv_trades_eml	EGL_EJM
eagle_trs_upsize_preproc	EGL_EJM
eagle_trs_xslt_cost_basis_adj	EGL_EJM
eagle_wrf_cloud_extract_schd	EGL_EJM		This stream is used to restart the eagle_wrf_cloud_extract workflow
eagle_wrf_csv_benchmark_returns_tsk	EGL_EJM		These streams transform CSV format to EagleML format using the rule service
eagle_wrf_csv_calendar_holiday_tsk	EGL_EJM
eagle_wrf_csv_calendar_tsk	EGL_EJM
eagle_wrf_csv_entity_generic_tsk	EGL_EJM
eagle_wrf_csv_entity_to_composite_tsk	EGL_EJM
eagle_wrf_csv_issue_fx_pc_rate_tsk	EGL_EJM
eagle_wrf_csv_issue_fx_rate_tsk	EGL_EJM
eagle_wrf_csv_issue_pc_price_tsk	EGL_EJM
eagle_wrf_csv_issue_price_tsk	EGL_EJM
eagle_wrf_csv_issuer_role_tsk	EGL_EJM
eagle_wrf_csv_position_generic_tsk	EGL_EJM
eagle_wrf_csv_smf_generic_tsk	EGL_EJM
eagle_wrf_csv_warehouse_nav_tsk	EGL_EJM
eagle_wrf_csv_warehouse_openlot_tsk	EGL_EJM
eagle_wrf_csv_wh_cash_activity_tsk	EGL_EJM
eagle_wrf_csv_wh_cash_flow_projection_tsk	EGL_EJM
eagle_wrf_csv_wh_close_lot_tsk	EGL_EJM
eagle_wrf_csv_wh_gl_balances_tsk	EGL_EJM
eagle_wrf_csv_wh_nav_month_end_tsk	EGL_EJM
eagle_wrf_csv_wh_trade_tsk	EGL_EJM
eagle_wrf_delta_extract_restart	EGL_EJM		This stream is used to restart the eagle_wrf_delta_extract workflow
eagle_wrf_ebs_reload_datacache_schd	EGL_EJM		This stream is used to

split the Generic SMF file into several Reference and SMF files and route them to

restart the eagle_

ml-2-0_default_in_xml_delete_objects streameagle_ml-2-0_default_in_xml_ent_no_splitEGL_EagleML

wrf_ebs_reload_datacache workflow
eagle_wrf_full_extract_restart	EGL_EJM		This stream is used to

load the Entity objects sequentiallyeagle_ml-2-0_default_in_xml_entityEGL_EagleML

restart the eagle_wrf_full_extract workflow
eagle_wrf_generic_extract_mc2_schd	EGL_EJM		This stream is used to

load the Entity objects

restart the eagle_wrf_generic_extract_mc2 workflow

eagle_

ml-2-0_default_in_xml_impairments

wrf_generic_extract_restart

EGL_

EagleML

EJM

This stream is used to

load the Impairments object

restart the eagle_wrf_generic_extract workflow

eagle_

ml-2-0_default_in_xml_issuer_mi

wrf_generic_purge_archive_restart

EGL_

EagleML

EJM

This stream is used to

split the Generic Issuer file into several Issuer files and route them to the eagle_ml-2-0_default_in_xml_reference streameagle_ml-2-0_default_in_xml_ref_extEGL_EagleML

restart the eagle_wrf_generic_purge_archive workflow
eagle_wrf_generic_purge_restart	EGL_EJM		This stream is used to

load

restart the

extended schedule objects

eagle_

ml-2-0_default_in_xml_ref_no_split

wrf_generic_purge workflow
eagle_wrf_i2i_message_distribution	EGL_

EagleML

EJM

This stream is used to

load the Reference objects. The incoming messages are processed sequentially in the order in which they are in the data fileeagle_ml-2-0_default_in_xml_referenceEGL_EagleML

deliver RTR/TSR/Data files (base64)
eagle_wrf_i2i_restart	EGL_EJM		This stream is used to

load the Reference objects

restart the eagle_wrf_i2i workflow

eagle_

ml-2-0_default_in_xml_smf_generic

wrf_i2i_sec_alias_sync_restart

EGL_

EagleML

EJM

This stream is used to

load

restart the

Generic SMF objecteagle_ml-2-0_default_in_xml_smf_miEGL_EagleMLThis stream is used to split the Generic SMF file into several Reference and SMF files and route them to the eagle_ml-2-0_default_in_xml_smf_generic and eagle_ml-2-0_default_in_xml_reference streamseagle_ml-2-0_default_in_xml_userEGL_EagleML

eagle_wrf_i2i_sec_alias_sync workflow
eagle_wrf_pending_trades_extract	EGL_EJM	These streams are used to maintain the eagle_wrf_pending_trades workflow
eagle_wrf_pending_trades_restart	EGL_EJM
eagle_wrf_pending_trades_t	EGL_EJM
eagle_wrf_tba_approve_restart	EGL_EJM
eagle_wrf_tba_consolidation_restart	EGL_EJM	This stream is used to

load the User objects

restart the eagle_wrf_tba_consolidation workflow

eagle_

ml-2-0_default_in_xml_warehouse

wrf_tba_mgr_alloc_restart

EGL_

EagleML

EJM

This stream is used to

load the Warehouse objects (XMLDBAPI format)eagle_ml-2-0_default_in_xml_warehouse_preprocEGL_EagleML

restart the eagle_wrf_tba_mgr_alloc workflow
eagle_wrf_tba_process_restart	EGL_EJM		This stream is used to

load the Warehouse objects (EagleML format)

restart the eagle_wrf_tba_process workflow

eagle_

ml-2-0_default_in_xml_washsale

wrf_trr_reset_demand

EGL_

EagleMLThis stream is

EJM

These streams are used to

load the Accounting washSale object

restart the eagle_wrf_trr_reset workflow
	eagle_

ml-2-0_default_out_extract_service

wrf_trr_reset_restart

EGL_

ExtractServiceMC2This MC2 stream is used to extract data eagle_ml-2-0_default_out_q

EJM
reload_datacache_tsk	EGL_

EagleML

EJM

This stream is

the first stage of the data export and manages the query process within the EJM framework

used to reload EBS cache

eagle_ml-2-0_default_in_xml_

out

route_

star

to_

extracts

eds

EGL_

EagleML

EJM

This stream is used to

extract data in STAR format

route EagleML data to EDS for load

eagle_

ml-2-0_

default

_out_streaming

_

t

ruleservice

EGL_

EagleMLThis stream is similar to the eagle_ml-2-0_default_out_t, as this stream is the second stage of the data export and manages the transformation process within the EJM framework. It uses the latest Eagle technology which enables tasks to be executed faster improving throughput.

ExtractService	MC2	These streams are used to execute requests in pyruleservice. It executes the mc2_service_client.py Python script that uses the RTR sent to the stream and creates a TSR. It also saves the RTR and TSR information in the orchestration tables to show it as an EJM task
eagle_iws_ruleservice	EGL_ExtractService		MC2
eagle_ml-2-0_default_

out

cm_

t

execebs

EGL_

EagleML

ExtractService

MC2

This stream is

the second stage of the data export and manages the transformation process within the EJM framework

used to execute EBS requests

eagle_ml-2-0_default_out_

validatepackage

extract_service

EGL_

EagleML

ExtractService

MC2

This

stream validates package integrity

MC2 stream is used to extract data
eagle_ml-2-0_extract_service_control_message	EGL_ExtractService		This stream receives and parses control messages.

The control message is an XML-formatted input message that EJM recognizes and processes as a command to execute specific MC2 events

eagle

_service

_default_bbca_helper	EGL_Generic		This stream performs transformation of the Bloomberg Corporate Actions to TagValue format
eagle_default_csv_raw_data_

empty

load

EGL_

IWS

Generic

This stream is used to

group the rules and include files that do not require an execution stream

load Global Values (Columns)

eagle_

tba

default_

extract

in_

cons

csv_

records

warehouse

EGL_

EJMThese streams are used to maintain the eagle_wrf_tba workflow. eagle_wrf_tba is a set of five independent workflows that may be run consecutively in straight-through mode or selectively in user/manual execution. The final step of each workflow allows the execution of the next logical series of events to be automated. The eagle_wrf_tba_approve workflow is broadly responsible for matching the records that have been placed in the TRADE_CONSOLIDATION table. The eagle_wrf_tba_process workflow is responsible for processing of each record that that matches others by the means of the consolidationFlag. The eagle_wrf_tba_mgr_alloc workflow allocates consolidated records amongst qualified managers to track the payoffs for each manager.eagle_tba_extract_mgr_alloc_recordsEGL_EJMeagle_tba_extract_records_1EGL_EJMeagle_tba_extract_t_mgr_allocEGL_EJMeagle_tba_group_by_positionEGL_EJMeagle_tba_run_consEGL_EJMeagle_tba_run_earningsEGL_EJMeagle_tba_t_consolidatedEGL_EJMeagle_tba_t_mgr_allocEGL_EJMeagle_tba_t_records_1EGL_EJMeagle_tba_update_status_1EGL_EJMeagle_trr_extract_cxlEGL_EJMThese streams are used to maintain the TRR SWAPS CXL RESET workflow. Multiple swaps may be targeted to be cancelled based on the swap underlying asset. This workflow updates the current reset process where multiple swaps may be targeted to reset based on the swap underlying asset id. This process may be triggered thru panels or automated using IWS via the control message.eagle_trr_extract_qtrrEGL_EJMeagle_trr_t_cxlEGL_EJMeagle_trr_t_qtrrEGL_EJMeagle_trs_common_preprocEGL_EJMThese streams are used to maintain the eagle_wrf_trs_upsize workfloweagle_trs_filter_errorEGL_EJMeagle_trs_reply_tEGL_EJMeagle_trs_t_csv_trades_emlEGL_EJMeagle_trs_upsize_preprocEGL_EJMeagle_trs_xslt_cost_basis_adjEGL_EJMeagle_wrf_cloud_extract_schdEGL_EJMThis stream is used to restart the eagle_wrf_cloud_extract workfloweagle_wrf_csv_benchmark_returns_tskEGL_EJMThese streams transform CSV format to EagleML format using the rule serviceeagle_wrf_csv_calendar_holiday_tskEGL_EJMeagle_wrf_csv_calendar_tskEGL_EJMeagle_wrf_csv_entity_generic_tskEGL_EJMeagle_wrf_csv_entity_to_composite_tskEGL_EJMeagle_wrf_csv_issue_fx_pc_rate_tskEGL_EJMeagle_wrf_csv_issue_fx_rate_tskEGL_EJMeagle_wrf_csv_issue_pc_price_tskEGL_EJMeagle_wrf_csv_issue_price_tskEGL_EJMeagle_wrf_csv_issuer_role_tskEGL_EJMeagle_wrf_csv_position_generic_tskEGL_EJMeagle_wrf_csv_smf_generic_tskEGL_EJMeagle_wrf_csv_warehouse_nav_tskEGL_EJMeagle_wrf_csv_warehouse_openlot_tskEGL_EJMeagle_wrf_csv_wh_cash_activity_tskEGL_EJMeagle_wrf_csv_wh_cash_flow_projection_tskEGL_EJMeagle_wrf_csv_wh_close_lot_tskEGL_EJMeagle_wrf_csv_wh_gl_balances_tskEGL_EJMeagle_wrf_csv_wh_nav_month_end_tskEGL_EJMeagle_wrf_csv_wh_trade_tskEGL_EJMeagle_wrf_ebs_reload_datacache_schdEGL_EJMeagle_wrf_delta_extract_restartEGL_EJMThis stream is used to restart the eagle_wrf_delta_extract workfloweagle_wrf_full_extract_restartEGL_EJMThis stream is used to restart the eagle_wrf_full_extract workfloweagle_wrf_generic_extract_mc2_schdEGL_EJMThis stream is used to restart the eagle_wrf_generic_extract_mc2 workfloweagle_wrf_generic_extract_restartEGL_EJMThis stream is used to restart the eagle_wrf_generic_extract workfloweagle_wrf_generic_purge_archive_restartEGL_EJMThis stream is used to restart the eagle_wrf_generic_purge_archive workfloweagle_wrf_generic_purge_restartEGL_EJMThis stream is used to restart the eagle_wrf_generic_purge workfloweagle_wrf_i2i_message_distributionEGL_EJMThis stream is used to deliver RTR/TSR/Data files (base64) eagle_wrf_i2i_restartEGL_EJMThis stream is used to restart the eagle_wrf_i2i workfloweagle_wrf_i2i_sec_alias_sync_restartEGL_EJMThis stream is used to restart the eagle_wrf_i2i_sec_alias_sync workfloweagle_wrf_pending_trades_extractEGL_EJMThese streams are used to maintain the eagle_wrf_pending_trades workfloweagle_wrf_pending_trades_tEGL_EJMeagle_wrf_pending_trades_restartEGL_EJMThis stream is used to restart the eagle_wrf_pending_trades workfloweagle_wrf_tba_approve_restartEGL_EJMThis stream is used to restart the eagle_wrf_tba_approve workfloweagle_wrf_tba_consolidation_restartEGL_EJMThis stream is used to restart the eagle_wrf_tba_consolidation workfloweagle_wrf_tba_mgr_alloc_restartEGL_EJMThis stream is used to restart the eagle_wrf_tba_mgr_alloc workfloweagle_wrf_tba_process_restartEGL_EJMThis stream is used to restart the eagle_wrf_tba_process workfloweagle_wrf_trr_reset_restartEGL_EJMThese streams are used to restart the eagle_wrf_trr_reset workfloweagle_wrf_trr_reset_demandEGL_EJMreload_datacache_tskEGL_EJMThis stream is used to reload EBS cacheeagle_default_file_distributionEGL_EJMThis stream was used to deliver files to another server. For example, within i2i workflow.
It is obsolete now, but documented for backwards compatibility.eagle_default_deployMC_INSTALLThis stream was used to install EagleML services. It is obsolete now, but documented for backwards compatibility.eagle_default_deploy_monitoringMC_INSTALLThis stream was used to install the monitoring. It is obsolete now, but documented for backwards compatibility.eagle_ml-2-0_default_in_xml_smf_customEGL_EagleMLThis stream was used to load the customSMF object. It is obsolete, but documented for backwards compatibility.eagle_sv_key_inst_distribEGL_Generic

These streams are Distribution streams utilizing the entity and instance folder. Were used to group and deliver data to pre-created MC instances. They are obsolete now, but documented for backwards compatibility.

eagle_sv_key_inst_procEGL_Generic

Generic		This stream uses a preprocessor rule file (*.prf), to sequentially execute the transformation from CSV to EagleML(XMLDBAPI)[BATCH mode] and send a result message for load to the stream eagle_ml-2-0_default_in_xml_warehouse or eagle_ml-2-0_default_in_xml_warehouse_preproc
eagle_default_in_csv_warehouse_sm	EGL_Generic		This stream uses a preprocessor rule file (*.prf), to sequentially execute the transformation from CSV to EagleML (XMLDBAPI) [SINGLE mode] and send a result message for load to the stream eagle_ml-2-0_default_in_xml_warehouse or eagle_ml-2-0_default_in_xml_warehouse_preproc
eagle_default_in_csv_warehouse_t	EGL_Generic		This stream performs transformation from CSV to EagleML(XMLDBAPI)
eagle_default_in_csv_warehouse_upsert	EGL_Generic		This stream uses a preprocessor rule file (*.prf), to sequentially execute transformation from CSV to EagleML(XMLDBAPI)[UPSERT mode] and send a result message for load to the stream eagle_ml-2-0_default_in_xml_warehouse or eagle_ml-2-0_default_in_xml_warehouse_preproc
eagle_default_in_pipe_performanceCLP	EGL_Generic		This stream uses a preprocessor rule file (*.prf), to sequentially execute the transformation step from PIPE Performance to EagleML and sends a result message for load to the stream eagle_ml-2-0_default_in_xml_warehouse_preproc
eagle_default_in_pipe_performanceCLP_t	EGL_Generic		This stream performs PIPE Performance to EagleML transformation
eagle_default_in_pipe_pos	EGL_Generic		This stream uses a preprocessor rule file (*.prf), to sequentially execute the transformation step from PIPE Position to EagleML and sends a result message for load to the stream eagle_ml-2-0_default_in_xml_warehouse_preproc
eagle_default_in_pipe_pos_t	EGL_Generic		This stream performs PIPE Position to EagleML transformation
eagle_default_raw_common_values_load	EGL_Generic		These streams are used to load Global Values (Columns)
eagle_default_raw_create_table	EGL_Generic
eagle_default_raw_create_view	EGL_Generic
eagle_default_raw_data_header_load	EGL_Generic
eagle_sv_key_inst_distrib	EGL_Generic	Obsolete	These streams are Distribution streams utilizing the entity and instance folder. Were used to group and deliver data to pre-created MC instances. They are obsolete now, but documented for backwards compatibility
eagle_sv_key_inst_proc	EGL_Generic	Obsolete
eagle_default_file_indexer	EGL_IWS		This stream identifies all references between different rules and creates a dependency tree for internal use in EBS/IWS/MT
eagle_default_file_move_or_copy	EGL_IWS		This stream is used to copy or move the file to a specified destination directory. It is primarily used by the "task move" shape in IWS
eagle_iws_cache	EGL_IWS		This stream is used to cache IWS resources
eagle_iws_db_api	EGL_IWS		Allows some Integration and Workflow Studio requests to be converted into safe bind-based alternatives.
eagle_iws_delete_file	EGL_IWS		This stream is used by IWS to remove local files
eagle_iws_eagleml_panel	EGL_IWS		This stream is used by IWS to interact and execute the Xpanels
eagle_iws_export_solution	EGL_IWS		This stream compiles IWS solutions with the Java tool on the back-end
eagle_iws_export_solution_mcpkg	EGL_IWS		This stream compiles IWS solutions and sends the pkg files for the processed IWS solution
eagle_iws_find_and_get_file	EGL_IWS		This stream is used by IWS to locate files
eagle_iws_get_file	EGL_IWS		This stream is used by IWS to download files
eagle_iws_import_stream	EGL_IWS		This stream installs streams while migrating MC packages
eagle_iws_import_stream_request	EGL_IWS		This stream is used by IWS to start the import process requests
eagle_iws_import_stream_w	EGL_IWS		This stream uses files processed by the eagle_iws_import_stream_request and starts the process of the stream installation
eagle_iws_info	EGL_IWS		This stream is the IWS authorization stream
eagle_iws_list_files	EGL_IWS		This stream is used by IWS to download the list of files for a specific directory
eagle_iws_monitoring_api	EGL_IWS		This stream is used by the EJM Monitoring Tool to download task statistics
eagle_iws_rename_file	EGL_IWS		This stream is used by IWS to rename solution files
eagle_iws_save_file	EGL_IWS		This stream is used by IWS to upload files to the box
eagle_iws_shell	EGL_IWS		This is the IWS utils stream
eagle_service_data_empty	EGL_IWS		This stream is used to group the rules and include files that do not require an execution stream
eagle_ml-2-0_default_cm_self_system_check	EGL_SSC		This stream is used to self-check the configuration
eagle_default_deploy	MC_INSTALL	Obsolete	This stream was used to install EagleML services. It is obsolete now, but documented for backwards compatibility
eagle_default_deploy_demand	MC_INSTALL		This stream is used to deploy the rules and services manually
eagle_default_deploy_restart_mc	MC_INSTALL		This stream is designed to restart MC services while deploying a snapshot or a release package
eagle_default_deploy_service	MC_INSTALL		This stream is used to deploy services
eagle_default_deploy_support	MC_INSTALL		This stream is intended for back up operations during installation. For example: stopping MCCOMMANDEXECUTOR, checking the installed version of the component, checking free disk space
eagle_default_rollback	MC_INSTALL		This stream is designed to roll back to a later version after installing an earlier version. For the case when the previous version of EagleML is installed, the files in the package are compared by the manifest. If there are no such files in the installed package, they are deleted from the backend
eagle_iws_server_installer	MC_INSTALL		This stream uses the eagle_iws_import_stream_w to the install processed streams
eagle_iws_server_support	MC_INSTALL		This stream uses the eagle_iws_import_stream_w to copy source files for installing streams
eagle_mc_import_stream_request	MC_INSTALL		This stream is used to send a combined zip with a .files.b64 and a .pkg.b64 files to the mc_import_stream_w stream
eagle_mc_import_stream_w	MC_INSTALL		This stream is used to import streams. The incoming file is a ZIP which has two types of files: .files.b64 - base64 encoded ZIPs with files to be installed, starting from estar/ ; .pkg.b64 - base64 encoded ZIPs with *.pkg files to create the streams. The process first copies the files then runs the installation scripts for .pkg
eagle_mc_import_support_data	MC_INSTALL		This stream is used to load sources/code categories/code values/code transaction object
eagle_mc_server_installer	MC_INSTALL		This stream is used to deploy a snapshot or a release
eagle_mc_server_installer_ftp	MC_INSTALL		This stream is used to deploy a snapshot or a release from FTP
eagle_mc_server_installer_mq	MC_INSTALL		This stream is used to read JMS/MQ and send files to the appropriate stream
eagle_mc_server_installer_mq_decoder	MC_INSTALL		This stream is used to decode base64 file to zip archive and send the zip to eagle_mc_server_installer
eagle_mc_server_support	MC_INSTALL		This stream is used to perform basic commands during deployment. For example CHMOD, MKDIR, REINIT etc.
eagle_mc_server_support_amq_monitor	MC_INSTALL	Obsolete	This stream is used to send email notifications about actual stream information. The stream is out of date. It is maintained for backward compatibility
eagle_mc_server_support_import_dataflow	MC_INSTALL		This stream is used to install the Data Vendor Console dataflows
eagle_mc_server_support_import_stream	MC_INSTALL		This stream is used to import a stream package in Message Center
eagle_mc_server_support_jms	MC_INSTALL		This stream is used to perform basic commands for JMS using broadcast. This stream also performs eagle_mc_server_support_jms_exec in all instances
eagle_mc_server_support_jms_exec	MC_INSTALL		This stream is used to perform basic commands for JMS. For example: JMSSTATUS, JMSLIST, JMSSTOP, JMSSTART, JMSPROCINFO etc.
eagle_mc_server_support_reporter	MC_INSTALL		This stream is used to send Outbound Topic of Build Installation LOG files
eagle_mc_stream_installer	MC_INSTALL		This stream is used to install streams from zip archive. It is the old version of stream installer
prod_parallel_deployment_service	EGL_PROD_PAR		This stream is used to receive Production Parallel endpoint requests to execute the installation and manage the Production Parallel service
prod_parallel_broadcast_manage	EGL_PROD_PAR		This stream is used to broadcast Production Parallel endpoint requests

Versions Compared

Old Version 42

New Version Current

Key

Anchor

Streams

Streams
Required Message Streams

Stream Count

Page Comparison

Versions Compared

Old Version 42

New Version Current

Key

Anchor

Streams

StreamsRequired Message Streams

Stream Count

Streams
Required Message Streams