Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. From any Eagle window, click the Eagle Navigator button.
  2. Enter Message Center Console and you will see below window. Type ' eagle_default_deploy_demand’ demand in the Stream name box.   Once you choose the stream name, click Search.
  3. As you see The Stream Name appears displays on the window, right-click on the stream and click Run Now with Overrides.
  4. Choose the values as shown in the window below to install the MC2 components and then click Okclick Ok.
    The All Services value in the Component name will install all the services of MC2 components. 
                                                                                                                                                                                        
  5. Now that the installation of MC2 components have kicked off and you need to off  ensure the status of the installation by clicking the EJM Tasks button on the toolbar. 
                                                      
  6. Choose the date and time on the left pane when the installation kicked off and click and Searchand click and then click Search.
    You can see the progress of the as MC2 completes individual components of MC2 have been  completed.                           .                         

PACE-Report service

7. The pace-report service is not included in the deployment of All Services’Services. The pace report service is required to run performance reports via the REST API. ‘Pace-reportservice' needs to be installed separately. Repeat step #3 and continue with step #8.

...

9. Both MC2 and Pace-reportservice would have been previously installed on the server and you need to configure the web service Endpoints now.

...

12. The same configuration can be done from 'System Management Center'. From any Eagle window, click the click  Eagle Navigator button. 

13. Enter System Management Center in the Start Search text box and click the System Management Center link. Or, click All Programs and select System Management Center.

...

15. To open a Web Server for customization, right -click on it and choose Show Details. You need to change the configuration of all web servers on the region.             

...

17. In the right part of the window, you can now set the parameters in the [REDIRECTURL_2SITES] section.
The following parameters should be added to enable the EagleMLWebService30 Web Services/SOAP Endpoint and supported REST endpoints:

...